General Technical Specifications for Low Concentration Coal Mine Gas Alternating Current Generating Sets Driven by Reciprocating Internal Combustion Engine
1 Scope
This standard specifies the model naming, technical requirements, test methods, inspection rules, marking, packaging, transport and storage of generator set driven by reciprocating internal combustion engine fueled by coal mine gas having a low concentration.
This standard is applicable to 200 kW~2,000 kW AC power frequency generator sets driven by reciprocating internal combustion engine fueled by coal mine gas having a low concentration.
2 Normative References
The following documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document applies.
GB/T 191 Packaging - Pictorial marking for handling of goods
GB/T 2820.2-1997 Reciprocating internal combustion engine driven alternating current generating sets - Part 2: Engines
GB/T 2820.3-1997 Reciprocating internal combustion engine driven alternating current generating sets - Part 3: Alternating current generators for generating sets
GB/T 2820.4-1997 Reciprocating internal combustion engine driven alternating current generating sets - Part 4: Controlgear and switchgear
GB/T 2820.5-1997 Reciprocating internal combustion engine driven alternating current generating sets - Part 5: Generating sets
GB/T 2820.6-1997 Reciprocating internal combustion engine driven alternating current generating sets - Part 6: Test methods
GB/T 2820.9-2002 Reciprocating internal combustion engine driven alternating current generating sets - Part 9: Measurement and evaluation of mechanical vibrations
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Model naming
5 Technical requirements
6 Test method
