This code specifies the basic technical requirements in general plan transportation design for fossil fuel power plants.
This code is applicable to turbine generator unit capacity 125MW~600MW condensing fossil fuel power plants, as well as heat supply plant unit capacity 50MW or higher level thermal power plants. The code may also be used as reference for 600MW or higher level plant units.
This code is also applicable to designs for power plant construction or extension, and may be used as reference for reconstruction engineering design.
Foreword
1. Scope
2. Normative References
3. General Provisions
4. Plant General Planning
4.1 General Provisions
4.2 Whole Plant Planning
5. Plant General Plane Arrangement
5.1 General Provision
5.2 Arrangement of Main Buildings and Structures
5.3 Auxiliary Workshop Building and Subsidiary Buildings
5.4 Plant Administrative Management and Service Facilities
5.5 Enclosing Wall and Passageway
5.6 Site Treatment
5.7 Building and Structure Spacing
6. Vertical Arrangement
6.1 General Provisions
6.2 Designed Elevation Identification
6.3 Ladder Arrangement
6.4 Field Drainage
6.5 Earth and Stone Work
7. Pipeline Comprehensive Arrangement
7.1 General Provisions
7.2 Underground Pipeline
7.3 Aboveground Piping
8. Transportation
8.1 General Provisions
8.2 Railway
8.3 Road
8.4 Waterway
8.5 Transportation and Weighing Equipment
9. Greening Design
9.1 General Regulations
9.2 Greening Design
9.3 Tree Species Selection
10. Technical and Economic Targets
Appendix A
Appendix B
Appendix C
Appendix D
Appendix E
Appendix F
