1 Scope
This standard specifies the level of risk standard and basic security requirements for guns (ammunition) depot/storage room and is the fundamental basis for the design, construction, acceptance, and safety inspection of guns (ammunition) depot/storage room.
This standard is applicable to depot/storage room construction and security requirements for manufacture, distribution, equipment and configuration units of guns (ammunition) as well as units for configuring scientific research, exhibition and props guns (ammunition) as specified by Law of the People's Republic of China on Control of Guns.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 17565-2007 General Specification Burglary Resistant Safety Door
GB 50003-2001 Code for Design of Masonry Structures
GB 50010-2010 Code for Design of Concrete Structures
GB 50068-2001 Unified Standard Reliability Design of Building Structures
GB 50348-2004 Technical Code for Engineering of Security and Protection System
GB 50394-2007 Code of Design for Intrusion Alarm Systems Engineering
GB 50395-2007 Code of Design for Video Monitoring System
GA/T 73-1994 Thief resistant Mechanical Locks
GA 374-2001 Thief resistant Electronic locks
3 Terms and Definitions
For the purposes of this standard, the terms specified in GB 50348-2004 and the following ones apply.
3.1
guns-related unit
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Level of Risk and Level of Protection
5 Security Requirements
6 Implementation and Supervision
