標準編號:	GB 20073-2006
中文名稱:	摩托車和輕便摩托車 制動性能要求及試驗方法
英文名稱:	Performance and measurement method for braking of motorcycles and moped
中標分類:	T80    摩托車綜合
行業分類:	GB    國家標準
ICS分類:	43.140 43.140    摩托車和機動自行車 43.140
發布機構:	中華人民共和國國家質量監督檢驗檢疫總局 中國國家標準化管理委員會
發布日期:	2006-1-18
實施日期:	2006-7-1
標準狀態:	superseded
被新標準替代:	GB 20073-2018 摩托車和輕便摩托車制動性能要求及試驗方法
被替代日期:	2018-7-1
替代舊標準:	GB/T 5382.1-1996 摩托車和輕便摩托車制動性能試驗方法 制動距離
翻譯語言:	英文
文件格式:	PDF
中文字符數:	14000 字
翻譯價格(元):	980.0
交付時間:	付款后 1 個工作日

1 Scope This Standard specifies the performance and measurement method for braking of motorcycles and mopeds. This Standard is applicable to motorcycles and mopeds. This Standard is not applicable to the mopeds with maximum design speed not exceeding 25km/h and the vehicles fitted for invalid drivers. 2 Normative References The following normative documents contain provisions which, through reference in this Standard, constitute provisions of this Standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this Standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative document referred to applies.

Foreword II 1 Scope 2 Normative References 3 Terms and Definitions 4 Requirements 5 Tests Appendix A (Normative) Braking Test and Performance Appendix B (Normative) Requirements of Two-Wheeled Mopeds and Two-Wheeled Motorcycles Equipped with Anti-lock Devices Appendix C (Normative) Determination of Adhesion Coefficient (K) and Adhesion Utilization Rate (ε)