標準編號:	GB 22360-2008
中文名稱:	真空泵 安全要求
英文名稱:	Vacuum pumps - Safety requirements
中標分類:	J78    真空技術與設備
行業分類:	GB    國家標準
發布機構:	中華人民共和國國家質量監督檢驗檢疫總局 中國國家標準化管理委員會
發布日期:	2008-8-28
實施日期:	2009-10-1
標準狀態:	valid
被新標準替代:	強制性推薦性標準 其文本不做任何
替代舊標準:	公告：中華人民共和國國家標準批準發布公告2017年第7號
翻譯語言:	英文
文件格式:	PDF
中文字符數:	25000 字
翻譯價格(元):	1500.0
交付時間:	付款后 1 個工作日

Vacuum pumps - Safety requirements 1 Scope This standard is applicable to all vacuum pumps, vacuum pump combinations and vacuum pumping systems. The standard lists the significant hazards associated with vacuum pumps and specifies safety requirements applicable to the design, installation, operation, maintenance and dismantling of vacuum pumps during their foreseeable life and subsequent disposal. This standard is not applicable to pumps designed to pump continuously on open systems where the pump inlet pressure is above 75kPa (750mbar) absolute, i.e. vacuum cleaners, ventilation fans. Vacuum pumps intended for use in special applications shall also comply with any specific standards relating to those applications. 2 Normative references The following normative documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding any corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the latest editions of the standards indicated below. For undated references, the latest edition applies. GB/T 825 Eyebolts (GB/T 825-1988, neq ISO 3266: 1984) GB 2894 Safety signs (GB 2894-1996, neq ISO 3864: 1984) GB/T 3163 Vacuum technology - Terminology (GB/T 3163-2007, ISO 3529: 1981, MOD) GB 4793.1-2007 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements (GB 4793.1-2007, IEC 61010-1: 2001, IDT) GB 5226.1-2002 Safety of machinery - Electrical equipment of machines - Part 1: General requirements (IEC 60204-1: 2000, IDT) GB/T 5465.2 Graphical symbols for use on electrical equipment - Part 2: Graphical symbols (GB/T 5465.2-1996, idt IEC 417: 1994) GB/T 8196 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards (GB/T 8196-2003, ISO 14120: 2002, MOD) GB/T 12241 Safety valves - General requirements (GB/T 12241-2005, ISO 4126-1: 1991, MOD) GB/T 12265.1 Safety of machinery - Safety distances to prevent danger zones being reached by the upper limbs (GB/T 12265.1-1997, eqv EN 294: 1992) GB/T 14574 Acoustics - Declaration and verification of noise emission values of machinery and equipment (GB/T 14574-2000, eqv ISO 4871: 1996) GB/T 16273.1 Graphical symbols for use on equipment - Part 1: Common symbols (GB/T 16273.1-1996, neq ISO 7000: 1989) GB 16754 Safety of machinery - Emergency stop - Principles for design (GB 16754-1997, eqv ISO/IEC 13850: 1995) GB/T 18153 Safety of machinery - Temperatures of touchable surfaces - Ergonomics data to establish temperature limit values for hot surfaces (GB/T 18153-2000, eqv EN 563: 1994) GB 18209.1 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals (GB 18209.1-2000, idt IEC 61310-1: 1995) GB/T 21271 Vacuum technology - Noise measurement for vacuum pumps (GB/T 21271-2007, ISO 2151: 2004, MOD) ISO/TR 11688-1 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning ENV 1070 Safety of Machinery -Terminology EN 1127-1 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology EN 60079-0 Electrical appliance for explosive gas atmospheres - Part 0: Average requirements EN 60529 Degrees of protection provided by enclosures (IP code) EN 61000-6-2 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments EN 61000-6-4 Electromagnetic compatibility (EMC) Part 6-4: General standards - Emission standard for industrial environments 3 Terms and definitions For the purposes of this standard, the terms and definitions given in ENV 1070 and GB/T 3163 and the following apply. 3.1 vacuum state of gas in a specified space with the pressure below ambient atmosphere pressure Note: Vacuum is usually measured as the pressure of the residual gas expressed in Pascals (Pa) or millibar (mbar). 1mbar=100Pa.

Foreword i 1 Scope 2 Normative references 3 Terms and definitions 4 List of hazards specific to vacuum pumps 5 Safety requirements and measures 6 Marking, symbols and warnings 7 Information for use 8 Inspection Annex A (Normative) Labels, symbols and warnings Annex B (Informative) Numbers and names of standards in EN 1012-2:1996 with corresponding Chinese and international standards