GB 30510-2014 Fuel consumption limits for heavy-duty commercial vehicles
1 Scope
This document specifies the fuel consumption limits for heavy-duty commercial vehicles, production conformity, judgment on the same type and implementation of standards.
This document is applicable to commercial vehicles, including freight trains, semi-trailers, buses, dump trucks and city buses, with a maximum design total mass greater than 3,500 kg, capable of burning gasoline or diesel fuel.
This document is not applicable to special purpose vehicles.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 3730.1 Terms and definitions of motor vehicles, trailers and combination vehicle - Part 1: Types
GB/T 3730.2 Road vehicle - Masses - Vocabulary and codes
GB/T 17350 Terms marks and designation for special purpose vehicles and special trailers
GB/T 19596 Terminology of electric vehicles
GB/T 19754-2021 Test methods for energy consumption of heavy-duty hybrid electric vehicles
GB/T 27840-2021 Fuel consumption test methods for heavy-duty commercial vehicles
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 3730.1, GB/T 3730.2, GB/T 17350 and GB/T 19596 apply.
4 General requirements
4.1 The comprehensive fuel consumption of gasoline and diesel vehicles measured according to GB/T 27840-2021 shall meet the corresponding fuel consumption limits specified in Clause 5.
4.2 The comprehensive fuel consumption of hybrid electric vehicles measured according to GB/T 19754-2021 shall meet the corresponding fuel consumption limits specified in Clause 5.
4.3 The concrete truck mixers shall meet the fuel consumption limits of dump trucks specified in 5.4.
Contents
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 Fuel consumption limits
6 Production conformity
7 Judgment on the same type
8 Implementation of standards
