標準編號:	GB 50540-2009
中文名稱:	石油天然氣站內工藝管道工程施工規范
英文名稱:	Code for construction of pipe process in oil and gas transmission pipeline station
行業分類:	GB    國家標準
發布機構:	中華人民共和國建設部 中華人民共和國文化部
發布日期:	2009-11-30
實施日期:	2010-6-1
標準狀態:	valid
翻譯語言:	英文
文件格式:	PDF
中文字符數:	40000 字
翻譯價格(元):	800.0
交付時間:	付款后 1 個工作日

1.0.1 This code is formulated with a view to ensuring the construction quality of oil and gas station processing pipeline project and achieving safety, environmental protection and application. 1.0.2 This standard is applicable to the construction of station process pipeline engineering related to newly-built or rebuilt ( extended) crude oil, natural gas, coal gas and refined oil. 1.0.3 This code is not applicable to the construction of pipeline in the petroleum refining chemical plant and natural gas conditioning plant, the affiliated to the principal equipment parts such as the pump, heating furnace, flowmeter and skid-mounted equipment 1.0.4 This code specifies the basic technical requirements of pipeline engineering construction in the oil and gas station. Where the code disagrees with requirements of national laws and administrative regulations, the requirements of the national laws and administrative regulations shall apply. 10.5 Except that the requirements of code shall be met in the construction of oil and gas station process pipeline project, the requirements of relevant current national standards shall be complied with.

1 General Principles 2 Terms 3 Preparation Of Construction 4 Inspection And Storage On Materials, Pipe Fittings And Skid-Mounted Equipment 4.1 General Requirements 4.2 Inspection on Material, Pipe Fittings And Skid-Mounted Equipment 4.3 Storage of Materials, Pipe Fittings And Skid-Mounted Equipment 5 Cutting and Processing 5.1 Steel Pipe Cutting 5.2 Processing on Pipe fitting 5.3 Prefabrication of Pipeline Unit 6 Installation of Pipelines 6.1 General Requirement 6.2 Installation of Pipes 6.3 Installation of Valves 6.4 Fabrication And Installation of Pipe Fittings 7 Welding 7.1 General Requirements 7.2 Welding Material 7.3 Welding 7.4 Inspection and Acceptance of Weld Joint 8 Ditching, Lowering-in and Backfilling 8.1 Ditching 8.2 Lowering-in 8.3 Ditch Backfilling 9 Blowing and Pressure Test 9.1 General Requirements 9.2 Blowing and Washing 9.3 Test on Strength and Tightness 9.4 Drying 10 Corrosion Resistance and Thermal Insulation 10.1 General Requirement 10.2 Corrosion Resistance 10.3 Thermal Insulation 11 Health, Safety and Environment 12 Delivery of the project Appendix A Groove Type of Butt-joint Between Pipes Explanation of Wording in this Code