標準編號:	GB 5100-1994
中文名稱:	鋼質焊接氣瓶
英文名稱:	Welded steel gas cylinders
行業分類:	GB    國家標準
發布機構:	中華人民共和國質量監督檢驗檢疫總局
發布日期:	1994-12-26
實施日期:	1995-8-1
標準狀態:	valid
替代舊標準:	GB 5100-1985 鋼質焊接氣瓶
翻譯語言:	英文
文件格式:	PDF
中文字符數:	20,000 字
翻譯價格(元):	590.0
交付時間:	付款后 1 個工作日

GB 5100-1994 Welded steel gas cylinders In this standard, the international standard ISO 4706:1989 Refillable welded steel gas cylinders is adopted for welded steel gas cylinders with water volume no larger than 150L, albeit in a non-equivalent fashion. 1 Subject content and application scope This standard specifies the basic parameters, technical requirements, test methods, inspection rules, marking, packing, transport, storage, etc. of welded steel gas cylinders "hereinafter referred to as "steel cylinders"). This standard is applicable to steel cylinders designed for the repeated filling of low-pressure liquefied gas or dissolved gas, which are used under normal environment temperature (-40℃~60℃), with hydraulic test pressure no greater than 7.5MPa (gauge pressure) and nominal volume of 10L~1,000L. This standard is also applicable to steel cylinders used for the repeated filling of industrial liquefied petroleum gases specified in GB 11174. 2 Normative references GB 228 Metallic materials - Tensile testing GB 232 Metallic materials - Bend test GB 1804 Tolerances and fits - Limit deviations of dimensions without individual tolerance indications GB 2106 Metallic materials - Charpy (V-notch) impact test GB 4159 Metallic low temperature - Charpy impact test method GB 6397 Metallic materials - Test pieces for tensile testing GB 7144 Coloured cylinder mark for gases GB 8335 Special threads for gas cylinders GB 8337 Fusible plug for gas cylinders GB 9251 Method for hydraulic test of gas cylinders GB 11174 Liquefied petroleum gases GB 12137 Method for leakage test of gas cylinders GB/T 13005 Terminology of gas cylinders GB 15385 Method for hydraulic burst test of gas cylinders JB 4730 Nondestructive testing of pressure vessels ? 3 Terms and symbols 3.1 Terms batch specified quantity of steel cylinders produced continuously with the same design, material with the same designation, welding procedure and heat treatment process 3.2 Symbols a——Gap between head curve and sample plate, mm;Akv——Impact absorbing energy, J; b——Butt misalignment of weld, mm; c——Unevenness of head surface, mm; D——Nominal diameter of steel cylinder, mm; d——Diameter of bending axis used for the bend test, mm; Di——Inside diameter of steel cylinder, mm; Do——Outside diameter of steel cylinder, mm; E——Edge angle height of butt weld, mm; e——Difference between the maximum and minimum diameters of the cylindrical part of the cylinder on the same cross section, mm; h——Straight side height of the head, mm; Hi——Convex height in the head, mm; K——Shape factor of the head; L——Length of the cylinder body (including the height of head at both ends), mm; l——Length of the sample plate, mm; n——Ratio of bending axis diameter to specimen thickness; P——Nominal working pressure, MPa;

1 Subject content and application scope 2 Normative references 3 Terms and symbols 4 Basic parameters 5 Technical requirements 6 Test methods 7 Inspection rules 8 Marking, packing, transport and storage 9 Delivery documents Annex A (Informative) Product certificate Annex B (Informative) Quality certificate for batch inspection Additional explanation