Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
Thin head semi-tubular rivets
1 Scope
This standard is applicable to thin head semi-tubular rivets with a nominal diameter of d=1.2 mm ~ 10 mm.
2 Normative references
GB 116-86 Specifications for rivet
3 Dimensions
?
Table 1 In: mm
?
Table 2 In: mm
Note: Whenever possible, specifications in parentheses shall not be used.
?
4 Technical conditions
4.1 For rivets small in specification, when there is a risk of penetration with a dimension of t, its dimension is allowed to be reduced appropriately.
4.2 Other technical conditions shall be as specified in GB 116-86.
