1 Scope
This part of GB/T 10357 specifies the test method for strength and durability of tables.
This part is applicable to various tables used in household, hotel and restaurant.
2 Normative References
The following referenced document is indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.
GB/T 10357.5-2011 Test of Mechanical Properties of Furniture - Part 5: Strength and Durability of Storage Units
3 General Test Conditions
3.1 Specimen
The specimen shall be completely-assembled delivered finished product, and shall meet the requirements of product design drawing.
The CKD furniture shall be completely assembled according to drawing requirements; where there are various combination modes, the combination furniture shall be assembled in the mode which is most unfavorable for strength test and durability test.
Where the manufacturer doesn't provide the installation or assembling instruction, the assembling mode shall be recorded in the testing report during the testing.
Foreword I
1 Scope
2 Normative References
3 General Test Conditions
4 Test Facilities
5 Test Procedure
6 Evaluation of Test Results
Appendix A (Informative) Selection List for Test Levels
Bibliography
