標準編號:	GB/T 18430.1-2007
中文名稱:	蒸氣壓縮循環冷水(熱泵)機組第1部分:工業或商業用及類似用途的冷水(熱泵)機組
英文名稱:	Water chilling(heat pump) packages using the vapor compression cycle—Part 1:Water chilling(heat pump) packages for industrial & commercial and similar application
中標分類:	J73    制冷設備
行業分類:	GB    國家標準
ICS分類:	27.200 27.200    制冷技術 27.200
發布機構:	國家質量監督檢驗檢疫總局 國家標準化管理委員會
發布日期:	2007-11-5
實施日期:	2008-2-1
標準狀態:	superseded
被新標準替代:	GB/T 18430.1-2024 蒸氣壓縮循環冷水（熱泵）機組 第1部分：工業或商業用及類似用途的冷水（熱泵）機組
被替代日期:	2025-4-1
替代舊標準:	GB/T 18430.1-2001 蒸汽壓縮循環冷水（熱泵）機組工商業用和類似用途的冷水（熱泵）機組
翻譯語言:	英文
文件格式:	PDF
中文字符數:	20000 字
翻譯價格(元):	1400.0
交付時間:	付款后 1 個工作日

1 Scope This Part specifies terms and definitions, types and basic parameters, requirements, test methods, inspection rules, marks, package and storage of motor-operated packages using vapor compression refrigeration cycle for industrial & commercial and similar application. This Part is applicable to water chilling(heat pump)packages (over 50kW cooling capacity) for centralized air conditioning or process and is also applicable to packages used to prevent freezing caused by outdoor air temperature dropping or used as refrigerating (heating) packages. Packages driven by motor (diesel engine or gas engine) or turbine engine (steam turbine or combustion gas turbine) could also refer to this Part. This Part is not applicable for drinking water and beverage or used as industrial packages, which do not use water as the refrigerating (heating) agent. 2 Normative References The following normative documents contain provisions which, through reference in this text, constitute provisions of this Part of GB/T 18430. For dated references, subsequent amendments to (excluding amending error in the text), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of the normative document is applicable. For undated references, the latest edition of the normative document applies.

Contents Foreword I 1 Scope 2 Normative References 3 Terms and Definitions 4 Type and Basic Parameters 5 Requirements 6 Test Methods 7 Inspection Rules 8 Marking, Package and Storage Appendix A (Normative) Measurement (Sampling Method) for the Dry-Humid Bulb Temperature Denoting the Package Air Appendix B (Normative) Measurement for the Water Side Pressure Loss Of The Package Appendix C (Normative) Determination for the Fouling Factor Revision Temperature Difference of the Simulation Package Water Side Appendix D (Informative) Cooling Water Quality Appendix E (Informative) Calculation Sample for Part Load Value