Micropore anti-counterfeiting marker generated by heavy ion
1 Scope
This standard specifies the terms and definitions, classification, requirements, technical security and confidentiality, test, verification and evaluation methods, acceptance rules, marking, packaging, transportation and storage of micropore anti-counterfeiting markers generated by heavy ions.
This standard is applicable to anti-counterfeiting marker products based on anti-counterfeiting micropore membrane generated by heavy ion.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this national standard. For dated references, subsequent amendments (excluding corrections) to, or revisions, of any of these publications do not apply to this standard. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 2792-1998 Test method for peel strength of pressure-sensitive tape at 180° angle
GB/T 2828.1 Sampling procedures for inspection by attributes—Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (GB/T 2828.1-2003, ISO 2859-1:1999, IDT)
GB/T 2829 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability)
GB/T 17002-1997 Standardization of production management for anti-counterfeiting printing products
GB/T 17004-1997 Anti-counterfeiting technological terminology
GB/T 19425-2003 Universal technical requirements of anti-counterfeiting technical products
?
3 Terms and definitions
3.1
heavy ion
ions heavier than protons
3.2
micropore generated by heavy ion
nuclear track micropore
micropore formed in the insulating material irradiated by heavy ions with certain energy after proper treatment, which is also called nuclear track micropore
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Requirements
6 Technical security and confidentiality
7 Test, verification and evaluation methods
8 Acceptance rules
9 Marking, packaging, transportation and storage
