1 Scope
This standard specifies the basic parameters, technical requirements, test methods, inspection rules as well as marking, instructions for use, packaging, transportation and storage of automatic guided vehicles.
This standard is applicable to automatic guided vehicles (AGV).
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding any corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For any undated references, the latest edition of the document referred to applies.
GB/T 191 Packaging—Pictorial marking for handling of goods
(GB/T 191-2000, eqv ISO 780:1997)
GB 9969.1 General principles for preparation of instructions for use of industrial products
3 Basic parameters
The basic parameters of automatic guided vehicles include:
System control mode, operation mode, communication mode, navigation mode, drive mode, load mode, load capacity, dead weight, maximum motion speed, rated speed, navigation accuracy, parking accuracy, minimum radius of rotation, power supply mode, battery specification, and charging mode. The AGV manufacturer is required to provide basic parameter data for the user.
a) System control mode: refers to the acceptance mode of AGV as a system to operate its commands, which may be centralized control mode, distributed control mode, master-slave collaborative control mode or stand-alone automatic mode.
b) Operation mode: refers to the mode that a single AGV executes motion instructions, including manual mode, automatic mode, off-line automatic mode, etc.
c) Communication mode: refers to the mode in which the AGV establishes a communication connection with the related system, which may be wireless serial communication, infrared communication, wireless LAN communication, and the like.
d) Navigation mode: refers to the positioning method adopted by the AGV to match the operation map, which may be electromagnetic navigation, magnetic navigation, CCD image navigation, laser navigation, and the like.
Foreword i
1 Scope
2 Normative references
3 Basic parameters
4 Technical requirements
5 Test methods
6 Inspection rule
7 Marking, instructions for use, packaging, transportation and storage
