標準編號:	GB/T 22719.1-2008
中文名稱:	交流低壓電機散嵌繞組匝間絕緣 第1部分：試驗方法
英文名稱:	Interturn insulation of random-wound winding for AC low-voltage electrical machines - Part 1: Test methods
中標分類:	K20    旋轉電機綜合
行業分類:	GB    國家標準
ICS分類:	29.160.01 29.160.01    旋轉電機綜合 29.160.01
發布機構:	國家質量監督檢驗檢疫總局，國家標準化管理委員會
發布日期:	2008-12-30
實施日期:	2009-10-1
標準狀態:	valid
翻譯語言:	英文
文件格式:	PDF
中文字符數:	9000 字
翻譯價格(元):	290.0
交付時間:	付款后 1 個工作日

1 Scope This part of GB/T 22719 specifies the test method for interturn insulation test of random-wound winding for AC electrical machines. This part is applicable to the inspection of interturn insulation of random-wound winding for three-phase or single-phase AC electrical machine with rated voltage of 1140V and below. 2 Normative References The following documents contain provisions which, through reference in this part of GB/T 22719, constitute provisions of this part. For dated references, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest editions apply to this part. JB/T 9615.2-2000 Test limits of the interturn insulation on random-wound winding for AC low-voltage machines 3 Terms and Definitions For the purposes of this part, the following terms and definitions apply. 3.1 comparison method of impulse waveforms one method to conduct interturn insulation of electrical machine winding (or coil) through impulse voltage test. the principle is to apply the impulse voltage wave with the specified peak and wave front time alternately (or simultaneously) directly to the tested winding and the reference winding (or coil) with the same design, and detect whether the interturn insulation of electrical machine winding (or coil) is good by judging whether there is a difference in the damped oscillation waveform caused by the impulse voltage. See Annex A. 3.2 reference winding (or coil) the electrical machine winding (or coil) used to be compared with the tested winding (or coil) where the interturn insulation of electrical machine winding (or coil) is detected through comparison method of impulse waveforms.

Foreword i 1 Scope 2 Normative References 3 Terms and Definitions 4 Test Instruments 5 Test Methods 6 Selection Principle of Test Connection 7 Test Judgment 8 Automatic Test and Automatic Discrimination Annex A (Informative) Impulse Waveform Comparison Method