1 Scope
This Part of GB 22793 specifies test methods that assess the safety requirements given in GB 22793.1 “Furniture – Children’s High Chair - Part 1: Safety Requirements” of children’s high chairs and multi-purpose chairs for domestic use.
This Part is not applicable to such chairs may be convertible to low chairs, low chairs and tables and for such uses as baby walking frames, pushchairs, Swings, car chairs or reclining low chairs.
This Part describes a number of tests consisting of the application, to various Parts of the item, of forces simulating normal functional use, as well as misuse, that tan reasonably be expected to occur.
The tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes.
The tests are designed to be applied to a high chair that is fully assembled and ready for use.
The test results are only valid for the article tested. When the test results are intended to be applied to other similar articles, the test specimen should be representative of the production model.
In the case of designs not catered for in the test procedures, the test should be carried out as far as possible as described, and a list made of the deviations from the test procedure.
2 Normative References
The following Standards contain provisions which, through reference in this text, constitute provisions of this Part of GB 22793. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this Part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
Foreword II
1 Scope
2 Normative References
3 General Test Requirements
4 Test Equipment
5 Test Procedures
6 Test Report
Appendix A (Normative) Appearance Test Method
GB/T 22793.2-2008 引用如下標準：
* GB/T 22793.1-2008 * ISO 554 Standard Atmospheres for Conditioning and/or Testing - Specifications * ISO 2812-2 Paints and Varnishes - Determination of Resistance to Liquids - Water Immersion Method * ISO 4628-3 Paints and Varnishes - Evaluation of Degradation of Paint Coatings - Designation of Intensity, Quantity and Size of Common Types of Defect - Part 3: Designation of Degree of Rusting
