標準編號:	GB/T 231.1-2009
中文名稱:	金屬材料 布氏硬度試驗 第1部分：試驗方法
英文名稱:	Metallic materials—Brinell hardness test—Part 1:Test method
中標分類:	H22    金屬力學性能試驗方法
行業分類:	GB    國家標準
ICS分類:	77.040.10 77.040.10    金屬材料力學試驗 77.040.10
發布機構:	國家標準化委員會 國家質量監督檢驗檢疫總局
發布日期:	2009-6-25
實施日期:	2010-4-1
標準狀態:	superseded
被新標準替代:	GB/T 231.1-2018 金屬材料 布氏硬度試驗 第1部分: 試驗方法
被替代日期:	2019-2-1
替代舊標準:	GB/T 231.1-2002 金屬布氏硬度試驗 第1部分:試驗方法
翻譯語言:	英文
文件格式:	PDF
中文字符數:	10000 字
翻譯價格(元):	390.0
交付時間:	付款后 1 個工作日

1 Scope This part of GB/T 231 specifies the principle, symbols and abbreviated terms, apparatus, test piece, procedure, uncertainty of the results and test report for the Brinell hardness test for metallic materials. This part specifies the Brinell hardness test is up to the limit of 650 HBW. For Brinell hardness test of specific materials or products, shall be specified in particular standards. 2 Normative References The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of GB/T 231. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. GB/T 231.2 Metallic Materials — Brinell Hardness Test — Part 1: Verification and Calibration of Testing Machines (GB/T 231.2-2002, ISO6506-2:1999, MOD) GB/T 231.3 Metallic Materials — Brinell Hardness Test —Part 3: Calibration of Reference Blocks (GB/T 231.3-2002, ISO 6506-3:1999, MOD) GB/T 231.4 Metallic Materials — Brinell Hardness Test — Part 4: Tables of Hardness Values (GB/T 231.4-2009, ISO 6506-4:2005, IDT) JJF 1059 Evaluation and Expression of Uncertaintv in Measurement 3 Principle An indenter (hardmetal ball with certain diameter) is forced into the surface of a test piece and, after removal of the force, the diameter of the indentation d left in the surface is measured (see Figure 1).

Foreword 1 Scope 2 Normative References 3 Principle 4 Symbols and Abbreviated Terms 5 Apparatus 6 Test Piece 7 Procedure 8 Uncertainty of the Results 9 Test Report Appendix A (Informative) Procedure for Periodic Checking of the Testing Machine by the User Appendix B (Normative) Minimum Thickness of the Test Piece in Relation to the Mean Diameter of Indentation Appendix C (Informative) Uncertainty of the Measured Hardness Values