標準編號:	GB/T 23333-2024
中文名稱:	蒸發式冷風扇
英文名稱:	Evaporative air cooler
中標分類:	Y61    家用空調與冷藏器具
行業分類:	GB    國家標準
ICS分類:	23.120 23.120    通風機、風扇、空調器 23.120
發布機構:	國家市場監督管理總局 國家標準化管理委員會
發布日期:	2024-3-15
實施日期:	2024-10-1
標準狀態:	valid
替代舊標準:	GB/T 23333-2009 蒸發式冷風扇
翻譯語言:	英文
文件格式:	PDF
中文字符數:	23000 字
翻譯價格(元):	1610.0
交付時間:	付款后 1~5 個工作日

Evaporative air cooler 1 Scope This document specifies the terms and definitions, classification and model designation, requirements, test method, inspection rules, marking, packaging, transportation and storage of evaporative air coolers for household and similar use (hereinafter referred to as "air cooler"). This document is applicable to the evaporative air coolers for household and similar use with single-phase rated voltage not exceeding 250V and other rated voltage not exceeding 480V. This document is not applicable to: ——air coolers but designed exclusively for industrial purposes; ——air coolers intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapor or gas); ——air coolers with rated output air volume exceeding 1,500m3/h. 2 Normative references The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies. GB/T 1019 General requirements for the package of household and similar electrical appliances GB/T 1236 Industrial fans - Performance testing using standardized airways GB/T 2423.3 Environmental testing - Part 2: Testing method - Test cab: damp heat, steady state GB/T 2423.17 Environmental testing for electric and electronic products - Part 2: Test methods - Test Ka: Salt mist GB/T 2828.1 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection GB/T 2829 Sampling procedures and tables for periodic inspection by attributes (apply to inspection of process stability) GB/T 4214.1 Test method for noise of household and similar electrical appliances - General requirements GB 4343.1 Electromagnetic compatibility requirements for household appliances, electric tools and similar apparatus - Part 1: Emission GB/T 4706.1 Household and similar electrical appliances - Safety - Part 1: General requirements GB/T 4706.23 Household and similar electrical appliances - Safety - Part 2: Particular requirements for room heaters GB/T 4706.27 Household and similar electrical appliances-safety - Part 2: Particular requirements for fans GB/T 4706.45 Household and similar electrical appliances - Safety - Particular requirements for air-cleaning appliances GB/T 4706.115 Household and similar electrical appliances - Safety - Part 115: Particular requirements for evaporative air cooler GB/T 7725 Room air conditioner GB 17625.1 Electromagnetic compatibility - Limits - Part 1: Limits for harmonic current emissions (equipment input current ≤16A per phase) GB 21551.2 Antibacterial and cleaning function for household and similar electrical appliances - Particular requirements of material GB/T 35758-2017 Household electrical appliances - Measurement of standby power 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 evaporative air cooler an apparatus that uses the principle of evaporation and heat absorption of water to mechanically ventilate air through a moist cooling pad, thereby lowering the temperature of the treated air 3.2 cooling pad a substance that provides an evaporation interface and increases the area of water-air contact 3.3 air flow volume of air delivered by an air cooler per unit of time under specified conditions Note: It is expressed in m3/h. The rated output air flow is specified by the manufacturer. 3.4 evaporative quanlity amount of water consumed per unit time by the air cooler during evaporative cooling operation under specified conditions Note: It is expressed in mL/h or L/h. The rated evaporation is indicated by the manufacturer. 3.5 energy efficiency ratio ratio of the sensible heat taken away by the air flow per unit time to the input power of the air cooler when the air cooler undergoes evaporative cooling under the specified conditions Note: It is expressed in W/W. 3.6 rated water tank capacity amount of water to be contained when the tank is filled to the highest indicated water level prescribed by the manufacturer Note: It is expressed in L. The rated water tank capacity is indicated by the manufacturer. 3.7 standby mode(s) when connected to the main power, the air cooler provides one or more of the following user-oriented functions or protection functions, which is a continuous mode for any product: ——other modes (including active mode on or off) can be triggered by triggering remote switches (including remote control), internal sensors and timers; ——continuous function: information or status display including clock; ——continuous function: sensor-based function. 4 Classification and model designation 4.1 Product classification By function: ——Single cooling type: with code omitted; ——Heating and cooling type: with code indicated by R.

Contents Foreword I 1 Scope 2 Normative references 3 Terms and definitions 4 Classification and model designation 5 Technical requirements 6 Test methods 7 Inspection rules 8 Marking, instructions for use, packaging, storage and transportation Annex A (Normative) Test method for ambient surface temperature rise Bibliography

蒸發式冷風扇 1 范圍 本文件規定了家用和類似用途蒸發式冷風扇(以下簡稱“冷風扇”)的術語和定義、分類和型號命名、要求、試驗方法、檢驗規則、標志、包裝、運輸與貯存。 本文件適用于單相器具額定電壓不超過250 V, 其他器具額定電壓不超過480V 的家用和類似用途的蒸發式冷風扇。 本文件不適用于： ——專為工業用途而設計的冷風扇； ——打算使用在經常產生腐蝕性或爆炸性氣體(如粉塵、蒸氣或瓦斯氣體)等特殊環境場所的冷風扇； ——額定輸出風量超過1500 m3/h的冷風扇。 2 規范性引用文件 下列文件中的內容通過文中的規范性引用而構成本文件必不可少的條款。其中，注日期的引用文件，僅該日期對應的版本適用于本標準；不注日期的引用文件，其最新版本(包括所有的修改單)話用干 本文件。 GB/T 1019 家用和類似用途電器包裝通則 GB/T 1236 工業通風機 用標準化風道性能試驗 GB/T 2423.3 環境試驗 第2部分：試驗方法試驗 Cab: 恒定濕熱試驗 GB/T 2423.17 電工電子產品環境試驗 第2部分：試驗方法試驗 Ka: 鹽霧 GB/T 2828.1 計數抽樣檢驗程序 第1部分：按接收質量限(AQL) 檢索的逐批檢驗抽樣計劃 GB/T 2829 周期檢驗計數抽樣程序及表(適用于對過程穩定性的檢驗) GB/T 4214.1 家用和類似用途電器噪聲測試方法 通用要求 GB 4343.1 家用電器、電動工具和類似器具的電磁兼容要求 第1部分：發射 GB/T 4706.1 家用和類似用途電器的安全 第1部分：通用要求 GB/T 4706.23 家用和類似用途電器的安全 第23部分：室內加熱器的特殊要求 GB/T 4706.27 家用和類似用途電器的安全 第27部分：風扇的特殊要求 GB/T 4706.45 家用和類似用途電器的安全 第45部分：空氣凈化器的特殊要求 GB/T 4706.115 家用和類似用途電器的安全 第115部分：蒸發式冷風扇的特殊要求 GB/T 7725 房間空氣調節器 GB 17625.1 電磁兼容限值 第1部分：諧波電流發射限值(設備每相輸入電流≤16A) GB 21551.2 家用和類似用途電器的抗菌、除菌、凈化功能抗菌材料的特殊要求 GB/T 35758-2017 家用電器 待機功率測量方法 3 術語和定義 下列術語和定義適用于本文件。 3.1 蒸發式冷風扇 evaporative air cooler 利用水的蒸發吸熱原理，以機械通風的方式使空氣通過濕潤的冷卻填料，從而使被處理的空氣溫度降低的器具。 3.2 冷卻填料 cooling pad 提供蒸發介面并增加水與空氣接觸面面積的物質。 3.3 輸出風量 air flow 冷風扇在規定條件下，單位時間內所送出的風量。 注：單位為立方米每小時(m3/h) 。額定輸出風量為制造商明示的輸出風量。 3.4 蒸發量 evaporative quanlity 冷風扇在規定條件下進行蒸發冷卻運行時，單位時間內所消耗的水量。 注：單位為毫升每小時或升每小時(mL/h 或L/h)。額定蒸發量為制造商明示的蒸發量。 3.5 能效比 energy efficiency ratio 冷風扇在規定條件下進行蒸發冷卻運行時，單位時間內氣流所帶走的顯熱量與冷風扇輸入功率之比。 注：單位為瓦每瓦(W/W)。 3.6 水箱容量 rated water tank capacity 水箱加水至制造商規定的最高指示水位時所容納的水量。 注：單位為升(L)。額定水箱容量為制造商明示的水箱容量。 3.7 待機模式 standby mode(s) 冷風扇在連接到主電源時，提供以下一種或多種面向用戶功能或保護功能，且為持續的任何產品模式： ——可以通過觸發遠程開關(包括遠程控制),內部傳感器，定時器來觸發其他模式(包括活躍模式開啟或停止) ——持續功能：信息或包含時鐘的狀態顯示； ——持續功能：基于傳感器的功能。 4 分類和型號命名 4.1 產品分類 按功能分： ——單冷式：其代號省略； ——冷暖式：其代號用 R 表示。