Haemostatic forceps with box joint - General specifications
1 Scope
This standard specifies the materials, requirements, test methods, inspection rules, marking, and packaging, transportation and storage of haemostatic forceps products with box joints (hereinafter referred to as "haemostatic forceps").
This standard is applicable to the haemostatic forceps products with box joints.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions, of any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 230.1-2004 Metallic Rockwell hardness test - Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N and T) (ISO 6508-1:1999, MOD)
GB/T 1220-1992 Stainless steel bars (neq JIS G4303:1988)
GB/T 2828.1-2003 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (ISO 2859-1:1999, IDT)
GB/T 2829-2002 Sampling procedures and tables for periodic inspection by attributes (apply to inspection of process stability)
GB/T 8938-1988 Typing-paper
GB/T 12655-1998 Cigarette paper
YY/T 0149-2006 Medical instruments of stainless steel - Test methods of corrosion resistance
YY/T 1052-2004 Marking requirements for surgical instruments
3 Materials
The haemostatic forceps shall be made of 2Cr13Mo, or 2Cr13 and 1Cr13 specified in GB/T 1220-1992, or other applicable materials.
?
4 Requirements
4.1 The haemostatic forceps shall have good elasticity and robustness.
Foreword I
1 Scope
2 Normative references
3 Materials
4 Requirements
5 Test methods
6 Inspection rules
7 Marking
8 Packaging, transportation and storage
Annex A (Normative) Determination method for head-end swing of haemostatic forceps
