1 Scope
This standard specifies the boundary dimensions of double row tapered roller bearings.
This standard is applicable to double row tapered roller bearings and is used for the bearing manufacturer's design and the customer's type selection.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative documents referred to applies.
GB/T 273.1-2003 Rolling Bearings - Tapered Roller Bearing - Plan of Boundary Dimensions (ISO 355: 1977, MOD)
ISO 355: 2007 Rolling Bearings - Tapered Roller Bearings - Boundary Dimensions and Series Designations
3 Symbols (See Figure 1)
Foreword I
1 Scope
2 Normative References
3 Symbols
4 Boundary Dimensions
5 Designation Example
Appendix A (Normative) Boundary Dimensions of Parts of Bearings in ISO 355: 2007
GB/T 299-2008 引用如下標準：
* GB/T 273.1-2003 滾動軸承 圓錐滾子軸承 外表尺寸總方案 * ISO 355: 2007 Rolling Bearings - Tapered Roller Bearings - Boundary Dimensions and Series Designations
