標準編號:	GB/T 2997-2015
中文名稱:	致密定形耐火制品體積密度、顯氣孔率和真氣孔率試驗方法
英文名稱:	Test method for bulk density, apparent porosity and true porosity of dense shaped refractory products
中標分類:	Q40    耐火材料綜合
行業分類:	GB    國家標準
ICS分類:	81.080 81.080    耐火材料 81.080
發布機構:	中華人民共和國國家質量監督檢驗檢疫總局 中國國家標準化管理委員會
發布日期:	2015-12-10
實施日期:	2017-1-1
標準狀態:	valid
替代舊標準:	GB/T 2997-2000 致密定形耐火制品體積密度、顯氣孔率和真氣孔率試驗方法
翻譯語言:	英文
文件格式:	PDF
中文字符數:	11000 字
翻譯價格(元):	290.0
交付時間:	付款后 1 個工作日

1 Scope This standard specifies the terms and definitions, principles, apparatus and materials, test piece, test steps, result calculation, test error and test report for the determination of the bulk density, apparent porosity and true porosity of dense shaped refractory products. This standard is applicable to the determination of the bulk density, apparent porosity and true porosity of dense shaped refractory products. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies. GB/T 5071 Refractory materials - Determination of true density (GB/T 5071-2013, ISO 5018:1983, MOD) GB/T 8170 Rules of rounding off for numerical values & expression and judgment of limiting values GB/T 10325 Shaped refractory products - Rule of acceptance, sampling and inspection (GB/T 10325-2012, ISO 5022:1979, NEQ) GB/T 22230 Liquid chemical products for industrial use - Determination of density at 20℃ (GB/T 22230-2008, ISO 758:1976, IDT) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 bulk density ρb ratio of the mass of the dry material of a porous body to its bulk volume ? 3.2 bulk volume Vb sum of the volumes of the solid material, the open pores and the closed pores in a porous body Note: The roughness of the surface limits the accuracy of definition of the bulk volume and consequently, that of the bulk density. Also, the concept of bulk density becomes less precise when the volume of the sample diminishes below certain limits or when its texture (size of pores and grains) is too coarse. 3.3 true density ρt ratio of the mass of the dry material of a porous body to its true volume 3.4 true volume volume of the solid material in a porous body

Foreword II 1 Scope 2 Normative references 3 Terms and definitions 4 Principle 5 Apparatuses and materials 6 Test pieces 7 Test procedure 8 Result calculation 9 Test error 10 Test report Annex A (Informative) Comparison of the numbering of clauses in this standard with that in ISO 5017:2013 Annex B (Informative) Technical differences and their causes between this standard and ISO 5017:2013