GB/T 30002-2024 General technical requirements for children's toothbrushes
1 Scope
This document specifies the sensory quality, specifications and dimensions other technical requirements, as well as inspection rules, marking, packaging, transportation and storage of children's toothbrushes (hereinafter referred to as "toothbrushes"). It gives the classification that is convenient for technical requirements, and describes the corresponding test methods.
This document is applicable to the manufacture, inspection and sale of toothbrushes for use by children aged 14 years and under.
2 Normative references
The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 191 Packaging - Pictorial marking for handling of goods
GB/T 2828.1 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 2829 Sampling procedures and tables for periodic inspection by attributes (apply to inspection of process stability)
GB/T 4208-2017 Degrees of protection provided by enclosure (IP code)
GB/T 19342-2024 Manual toothbrushes - General requirements and test methods
GB 39669 General technical requirements for safety of toothbrushes and oral implements
GB/T 40362-2021 Powered toothbrushes - General requirements and test methods
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 39669, GB/T 19342-2024, GB/T 40362-2021 apply.
4 Classification
4.1 Toothbrushes can be divided into manual toothbrush and powered toothbrush according to the driving mode.
4.2 Toothbrushes can be divided into conventional head toothbrush, cylindrical head toothbrush and U-shaped head toothbrush according to the shape of the brush head, see Annex A for examples.
5 Requirements
5.1 Sensory quality
Sensory quality shall meet the requirements of GB/T 19342-2024, 4.1.
5.2 Specifications and dimensions
5.2.1 The specifications and dimensions of conventional head toothbrush shall meet the requirements of Table 1, and the dimensions as shown in Figure 1.
Table 1 Requirements for specifications and dimensions of conventional head toothbrush
Dimensions in millimeters
Foreword II
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Requirements
6 Test methods
7 Inspection rules
8 Marking, packaging, transportation and storage
Annex A (Informative) Children's toothbrush head
