標準編號:	GB/T 3048.4-2007
中文名稱:	電線電纜電性能試驗方法 第4部分:導體直流電阻試驗
英文名稱:	Test methods for electrical properties of electric cables and wires—Part 4:Test of DC resistance of conductors
中標分類:	K13    電纜及其附件
行業分類:	GB    國家標準
ICS分類:	29.060 29.060    電線和電纜 29.060
發布機構:	國家質量監督檢驗檢疫總局 國家標準化管理委員會
發布日期:	1983-01-01
實施日期:	2008-5-1
標準狀態:	valid
替代舊標準:	GB/T 3048.4-1994 電線電纜電性能試驗方法 導體直流電阻試驗
翻譯語言:	英文
文件格式:	PDF
中文字符數:	6000 字
翻譯價格(元):	290.0
交付時間:	付款后 1 個工作日

1 Scope This part of GB/T 3048 specifies the test equipment, sample preparation, test procedures, test results, calculation and test records of DC resistance of conductors. The test methods specified in this part are applicable to measure the DC resistance of electric wire and cable conductors. The measurement range is: ——Double bridge: (2 × 10-5 ~ 09.9)Ω; ——Wheatstone bridge: 1Ω ~ 100Ω or above. The test methods specified in this part are not applicable to measure the DC resistance of assembled electric wires and cables. This part shall be used together with GB/T 3048.1. 2 Normative References The provisions of the following documents which, through reference in this part of GB/T 3048, constitute provisions of this part. For dated reference, subsequent amendments to (excluding correction contents), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.

Contents Foreword i 1 Scope 2 Normative References 3 Test Equipment 4 Sample Preparation 5 Test Procedures 6 Test Result and Its Calculation 7 Test Data Sheet