標準編號:	GB/T 30733-2014
中文名稱:	煤中碳?xì)涞臏y(cè)定 儀器法
英文名稱:	Determination of total carbon, hydrogen and nitrogen content in coal—Instrumental method
中標分類:	D21    煤炭分析方法
行業分類:	GB    國家標準
ICS分類:	73.040 73.040    煤 73.040
發布機構:	中華人民共和國國家質量監督檢驗檢疫總局 中國國家標準化管理委員會
發布日期:	2014-06-09
實施日期:	2014-10-1
標準狀態:	valid
翻譯語言:	英文
文件格式:	PDF
中文字符數:	10000 字
翻譯價格(元):	240.0
交付時間:	付款后 1 個工作日

1 Scope This standard specifies the method summary, reagents and materials, instruments and apparatus, determination, calibration, expression of results, precision etc. for determination of total carbon, hydrogen and nitrogen content in coal with instrumental method. This standard is applicable to the rapid determination of total carbon, hydrogen and nitrogen content in lignite, bituminite and anthracite. 2 Normative References The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 212 Proximate Analysis of Coal GB/T 218 Determination of Carbon Dioxide Content in the Mineral Carbonates Associated with Coal GB/T 483 General Rules for Analytical and Testing Methods of Coal 3 Method Summary The coal sample with known mass sufficiently combusts in oxygen stream at high temperature, and the mixture of carbon dioxide, water and nitrogen/nitrogen oxide is generated through complete combustion of carbon, hydrogen and nitrogen in coal. The influence factors (e.g. the combustion product of sulfur, chlorine etc.) disturbing the determination are filtered through specific handling system and all nitrogen oxide are reduced to nitrogen. The carbon, hydrogen or nitrogen content in coal is quantitatively determined according to carbon dioxide, vapor and nitrogen respectively with specific detection system. 4 Reagents and Materials 4.1 Carrier gas: helium or other suitable gas as specified in the instrument instruction. 4.2 Oxygen: as specified in the instrument instruction. 4.3 Reagents: as specified in the instrument instruction.

Foreword i 1 Scope 2 Normative References 3 Method Summary 4 Reagents and Materials 5 Instruments and Apparatus 6 Determination 7 Calibration 8 Expression of Results 9 Method Precision 10 Test Report Annex A (Informative) Corresponding Numbering Equivalent Clauses between This Standard and ISO 29541: Annex B (Informative) Technical Deviations between This Standard and ISO 29541:2010 and Their Justifications Annex C (Informative) Examples of Instrument Calibration Method