Polymeric polyols
1 Scope
This standard specifies the designation, requirements, test methods, inspection rules, marking, packaging, transportation and storage of polymeric polyols.
This standard is applicable to polymeric polyols synthesized from polyether polyols, styrene, acrylonitrile, etc.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies.
GB/T 6680-2003 General rules for sampling liquid chemical products
GB/T 8170-2008 Rules of rounding off for numerical values & expression and judgment of limiting values
GB/T 12008.2-2010 Plastics - Polyether polyols - Part 2: Specification
GB/T 12008.3-2009 Plastics - Polyether polyols - Part 3: Determination of hydroxyl number
GB/T 12008.5-2010 Plastics - Polyether polyols - Part 5: Determination of acidity as acid number
GB/T 12008.7-2010 Plastics - Polyether polyols - Part 7: Determination of viscosity
GB/T 22313-2008 Plastics - Polyols for use in the production of polyurethan - Determination of water content
3 Rules for designation
3.1 Designation of polymeric polyols
The designation of polymeric polyols consists of fixed name and characteristic items, with the fixed name as polymeric polyols ("POP" for short). The characteristic item group consists of two character groups: character group 1, representing the hydroxyl number of the basic polyether polyol, which is expressed by two digits, and character group 2, representing the mass fraction of styrene and acrylonitrile in polymeric polyols, which is also expressed by two digits. The designation pattern of polymeric polyols is shown in Table 1.?
Foreword i
1 Scope
2 Normative references
3 Rules for designation
4 Requirements
5 Test methods
6 Inspection rules
7 Marking, packaging, transportation and storage
Annex A (Informative) Comparison list of new and old specifications of main products
