標準編號:	GB/T 31903-2024
中文名稱:	服裝襯布產品標記、標志與包裝
英文名稱:	Identification
中標分類:	W01    技術管理
行業分類:	GB    國家標準
ICS分類:	59.080.01 59.080.01    紡織產品綜合 59.080.01
發布機構:	國家市場監督管理總局 國家標準化管理委員會
發布日期:	marking and packing for garment interlining
實施日期:	2024-3-15
標準狀態:	valid
替代舊標準:	2024-10-1 GB/T 31903-2015 服裝襯布產品命名規則、標志和包裝
翻譯語言:	英文
文件格式:	PDF
中文字符數:	9000 字
翻譯價格(元):	630.0
交付時間:	付款后 1~3 個工作日

Identification, marking and packing for garment interlining 1 Scope This document specifies the classification, identification, marking and packing for garment interlining. This document is applicable to woven interlining, knitted interlining and nonwoven interlining made of various materials. 2 Normative references The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 4456 Polyethylene blown film for packaging applications GB/T 5296.4 Instructions for use of products of consumer interest - Part 4: Textiles and apparel GB/T 6543 Single and double corrugated boxes for transport packages GB/T 8946 General technical requirements of plastic woven sack GB/T 21244 Paper cores QB/T 3811 Plastic packing belt 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 base fabric unprocessed fabric absent from coating and other dyeing and finishing processes that is used for manufacturing garment interlining 3.2 woven interlining garment interlining suffering from coating and other dyeing and finishing processes with woven fabric as the base fabric 3.3 knitted interlining garment interlining suffering from coating and other dyeing and finishing processes with knitted fabric as the base fabric 3.4 nonwoven interlining garment interlining suffering from coating and other dyeing and finishing processes with nonwoven fabric as the base fabric 3.5 hot-melt adhesive film interlining garment interlining suffering from hot melt, scraping and other processes with hot-melt adhesive as raw material Note: Hot-melt adhesive film interlining includes membrane and omental products. 4 Product classification and identification 4.1 Product classification 4.1.1 Products are classified into woven interlining, knitted interlining and nonwoven interlining. 4.1.2 Knitted interlining includes weft knitted interlining, weft-lined warp knitted interlining, and biaxial warp knitted interlining. 4.1.3 Nonwoven lining includes nonwoven adhesive interlining and hot-melt adhesive film interlining. 4.2 Product identification 4.2.1 Woven interlining The product identification shall include: raw material code and blending ratio warp yarn density (tex/dtex)/weft yarn density (tex/dtex) warp density (threads/10cm)/weft density (threads/10cm) breadth (cm) fabric weave mass per unit area (g/m2) type of rubber powder (two or more rubber powders are connected with the symbol "+")-number of glue points per unit area (points/cm2) net (dots) pattern (regular or irregular). Example: T/C 65/35 28.1 tex/28.1 tex 212.0/216.0 110 plain weave 165 HDPE + PES-161 irregular. It represents 65% polyester 35% and cotton blended yarn, warp yarn density 28.1 tex, weft yarn density 28.1 tex, warp density 212.0 threads/10cm, weft density 216.0 threads/10cm, breadth 110cm, plain fabric weave, mass per unit area 165g/m2, HDPE+PES rubber powder, number of glue points per unit area 161 points/cm2, irregular net pattern. Note: Products coated with film include the layer number of laminating and the type of adhesive film.

Contents 1 Scope 2 Normative references 3 Terms and definitions 4 Product classification and identification 5 Marking 6 Packing 7 Others

服裝襯布產品標記、標志與包裝 1 范圍 本文件規定了服裝襯布產品的產品分類、標記、標志和包裝。 本文件適用于各種材質的機織襯、針織襯、非織造襯。 2 規范性引用文件 下列文件中的內容通過文中的規范性引用而構成本文件必不可少的條款。其中，注日期的引用文件，僅該日期對應的版本適用于本文件；不注日期的引用文件，其最新版本（包括所有的修改單）適用于本文件。 GB/T 4456 包裝用聚乙烯吹塑薄膜 GB/T 5296.4 消費品使用說明 第4部分：紡織品和服裝 GB/T 6543 運輸包裝用單瓦楞紙箱和雙瓦楞紙箱 GB/T 8946 塑料編織袋通用技術要求 GB/T 21244 紙芯 QB/T 3811 塑料打包帶 3 術語和定義 下列術語和定義適用于本文件。 3.1 基布 base fabric 用于制造服裝襯布用的未經涂層等染整加工的織物。 3.2 機織襯 woven interlining 采用機織物為基布，經涂層等染整加工而成的服裝襯布。 3.3 針織襯 knitted interlining 采用針織物為基布，經涂層等染整加工而成的服裝襯布。 3.4 非織造襯 nonwoven interlining 采用非織造布為基布，經涂層等染整加工而成的服裝襯布。 3.5 熱熔膠膜粘合襯 hot-melt adhesive film interlining 以熱熔膠粘劑為原料，經熱熔、刮涂等加工而成的服裝襯布。 注：熱熔膠膜粘合襯包含薄膜型和網膜型等產品。 4 產品分類、標記 4.1 產品分類 4.1.1 產品分為機織襯、針織襯和非織造襯。 4.1.2 針織襯包含緯編針織襯、襯緯經編針織襯、雙軸向經編針織襯。 4.1.3 非織造襯包含非織造粘合襯、熱熔膠膜粘合襯。 4.2 產品標記 4.2.1 機織襯 產品標記應包括：原料代號和混紡比 經紗線密度(tex/dtex)/ 緯紗線密度(tex/dtex) 經紗密度(根/10 cm)/緯紗密度(根/10 cm) 幅寬(cm) 織物組織單位面積質量(g/m2) 膠粉種類(二種及以上膠粉用符號“+”連接)-單位面積膠點數量(點/cm2) 網(點)型(規則或不規則)。 示例：T/C 65/35 28.1 tex/28.1 tex 212.0/216.0 110平紋165 HDPE+PES-161不規則。表示65%滌綸35%棉混紡紗，經紗線密度28.1 tex，緯紗線密度28.1 tex，經紗密度212.0根/10cm，緯紗密度216.0根/10cm，幅寬110cm，織物組織為平紋，單位面積質量165g/m2，HDPE+PES膠粉，單位面積膠點數量161點/cm2，網型不規則。 注：覆膜產品包含復合層數及膠膜類型。