Foreword
Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is developed in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by the China Building Materials Federation.
This standard is under the joint jurisdiction of the National Technical Committee on Glass in Building of Standardization Administration of China (SAC/TC 255) and the National Technical Committee on Energy Fundamentals and Management of Standardization Administration of China (SAC/TC 20).
Test method of energy consumption per unit products for tempered glass
1 Scope
This standard specifies the statistical classification, statistical period and statistical preparation of energy consumption per unit products for tempered glass, as well as the energy consumption statistics, output statistics and energy consumption calculation methods of energy consumption per unit products for tempered glass.
This standard is applicable to the energy consumption test of flat tempered glass production line using physical tempering method.
This standard is not applicable to the energy consumption test of tempered glass production line using chemical method.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 15763.2 Safety glazing materials in building - Part 2: Tempered glass
GB/T 20840.2 Instrument transformers - Part 2: Additional requirements for current transformers
3 Statistical classification
Statistics of common flat tempered glass, low emissivity coated flat tempered glass, common curved tempered glass and low emissivity coated curved tempered glass shall be measured separately.
4 Statistical period
The statistical period of one tempered glass production line producing glass with the same thickness and category is at least 1 hour of continuous production and no less than 5 furnace volumes.
Foreword i
1 Scope
2 Normative references
3 Statistical classification
4 Statistical period
5 Statistical preparation
6 Energy consumption and output statistics
7 Calculation method of energy consumption
ICS 81.040.20
Q 33
GB
中華人民共和國國家標準
GB/T 36267—2018
鋼化玻璃單位產品能耗測試方法
Test method of energy consumption per unit products for tempered glass
2018-06-07發布 2019-05-01實施
國家市場監督管理總局
中國國家標準化管理委員會 發布
前言
本標準按照GB/T 1.1—2009給出的規則起草。
本標準由中國建筑材料聯合會提出。
本標準由全國建筑用玻璃標準化技術委員會(SAC/TC 255)、全國能源基礎與管理標準化技術委員會(SAC/TC 20)共同歸口。
鋼化玻璃單位產品能耗測試方法
1 范圍
本標準規定了鋼化玻璃單位產品能耗的統計分類、統計期、統計準備、能耗及產量統計和能耗計算方法。
本標準適用于物理鋼化法水平式鋼化玻璃生產線能耗的測試。
本標準不適用于化學法鋼化玻璃生產線能耗的測試。
2 規范性引用文件
下列文件對于本文件的應用是必不可少的。凡是注日期的引用文件，僅注日期的版本適用于本文件。凡是不注日期的引用文件，其最新版本(包括所有的修改單)適用于本文件。
GB 15763.2 建筑用安全玻璃 第2部分：鋼化玻璃
GB/T 20840.2 互感器第2部分：電流互感器的補充技術要求
3 統計分類
平面普通鋼化玻璃、平面低輻射鍍膜鋼化玻璃、曲面普通鋼化玻璃和曲面低輻射鍍膜鋼化玻璃分別統計。
4 統計期
同一鋼化玻璃生產線同厚度同類別鋼化玻璃統計期為：至少連續生產1h，且不少于5爐。
