GB/T 45337-2025 Tires intelligent manufacturing - Manufacturing execution system (MES) deployment - General specification
1 Scope
This document specifies the general principles, deployment architecture, management system, data storage services, interface services, equipment sensing layer, and basic network hardware requirements for the manufacturing execution system (MES) for tires intelligent manufacturing.
This document is applicable to the planning, deployment, and implementation of the MES for tires intelligent manufacturing.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 25485 Industrial automation systems and integration - Functional architecture of manufacturing execution system
GB/T 36587 Rubber and plastic machinery - Terminology
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 25485 and GB/T 36587 apply.
4 Abbreviations
For the purposes of this document, the following abbreviations apply.
AGV: Automated Guided Vehicle
APS: Advanced Planning and Scheduling
BOM: Bill of Material
BI: Business Intelligence
ERP: (Enterprise Resource Planning
HR: Human Resources
MES: Manufacturing Execution System
MQTT: Message Queuing Telemetry Transport Protocol
OA: Office Automation
OEE: Overall Equipment Effectiveness
OPC: OLE for Process Control
PCS: Process Control System
PDA: Personal Digital Assistant
PLC: Programmable Logic Controller
PLM: (Product Lifecycle Management
RGV: Rail Guided Vehicle
RFID: Radio Frequency Identification
SAP: System Applications and Products
SCM: Supply Chain Management
UPS: Uninterruptible Power System
WMS: Warehouse Management System
Contents
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviations
5 General principles of the MES
6 Architecture of the MES
7 Management system for the MES
7.1 General
7.2 Material basic data management
7.3 Production order management
7.4 Job scheduling management
7.5 Quality management
7.6 Technological management
7.7 Production process management
7.8 Inventory management
7.9 Logistics scheduling management
7.10 Equipment maintenance management
7.11 Technological tooling management
7.12 Performance management
7.13 Energy management
8 Data storage services
8.1 General
8.2 Real-time database
8.3 Production database
8.4 Historical database
9 Interface specification
9.1 General
9.2 ERP interface
9.3 PLM interface
9.4 PCS interface
9.5 Communication interface
9.6 Other system interfaces
10 Equipment sensing layer
10.1 General
10.2 Data acquisition points
10.3 Upper computer system
11 Basic network hardware
11.1 Data center
11.2 Network planning
11.3 Data security
Annex A (Informative) External interface information for MES in the tire industry
A.1 Information on interface between MES and ERP in the tire industry
A.2 Information on interface between MES and PLM in the tire industry
A.3 Information on interface between MES and PCS in the tire industry
Annex B (Informative) Server deployment list information for the tire industry
輪胎智能制造
制造執行系統（MES）部署 通用規范
1 范圍
本文件規定了輪胎智能制造執行系統（MES）總則、部署架構、管理系統、數據存儲服務、接口服務、設備傳感層、基礎網絡硬件的要求。
本文件適用于輪胎智能制造MES規劃和部署實施。
2 規范性引用文件
下列文件中的內容通過文中的規范性引用而構成本文件必不可少的條款。其中，注日期的引用文件，僅該日期對應的版本適用于本文件；不注日期的引用文件，其最新版本（包括所有的修改單）適用于本文件。
GB/T 25485 工業自動化系統與集成 制造執行系統功能體系結構
GB/T 36587 橡膠塑料機械 術語
3 術語和定義
GB/T 25485和GB/T 36587界定的術語和定義適用于本文件。
4 縮略語
下列縮略語適用于本文件。
AGV：自動導引運輸車（Automated Guided Vehicle）
APS：高級計劃排程系統（Advanced Planning and Scheduling）
BOM：物料清單（Bill of Material）
BI：商業智能（Business Intelligence）
ERP：企業資源計劃（Enterprise Resource Planning）
HR：人力資源（Human Resources）
MES：制造執行系統（Manufacturing Execution System）
MQTT：消息隊列遙感傳輸協議（Message Queuing Telemetry Transport Protocol）
OA：辦公自動化（Office Automation）
OEE：設備綜合效率（Overall Equipment Effectiveness）
OPC：用于過程控制的工業標準協議（OLE for Process Control）
PCS：過程控制系統（Process Control System）
PDA：掌上電腦（Personal Digital Assistant）
PLC：可編程邏輯控制器（Programmable Logic Controller）
PLM：產品生命周期管理（Product Lifecycle Management）
RGV：有軌制導車輛（Rail Guided Vehicle）
RFID：射頻識別（Radio Frequency Identification）
SAP：企業管理解決方案（System Applications and Products）
SCM：供應鏈管理（Supply Chain Management）
UPS：不間斷電源（Uninterruptible Power System）
WMS：倉儲管理系統（Warehouse Management System）
