標準編號:	GB/T 6060.3-2008
中文名稱:	表面粗糙度比較樣塊 第3部分：電火花、拋（噴）丸、噴砂、研磨、銼、拋光加工表面
英文名稱:	Surface roughness comparison specimen － Part 3：Spark-eroded，shot-blasted，grit-blasted，lapped，filed and polished surface
中標分類:	J42    量具與量儀
行業分類:	GB    國家標準
ICS分類:	17.040.30 17.040.30    測量儀器儀表 17.040.30
發布機構:	中華人民共和國質量監督檢驗檢疫總局
發布日期:	2008-02-28
實施日期:	2008-8-1
標準狀態:	valid
替代舊標準:	GB/T 6060.4-1988 GB/T 6060.5-1988 表面粗糙度比較樣塊 拋(噴)丸、噴砂加工表面 GB/T 6060.3-1986 表面粗糙度比較樣塊 電火花加工表面
翻譯語言:	英文
文件格式:	PDF
中文字符數:	6000 字
翻譯價格(元):	200.0
交付時間:	付款后 1 個工作日

1 Scope This part of GB/T 6060 specifies the terms and definitions, methods of manufacture, surface characteristics, parameter value of surface roughness, evaluation of surface roughness, structure and dimension, lay of processing, and marking and packaging of roughness comparison specimens of spark-eroded, shot-blasted, grit-blasted, lapped, filed and polished surfaces. This part is applicable to surface roughness comparison specimen of spark-eroded, shot-blasted, grit-blasted, lapped, filed and polished surfaces. The roughness comparison specimen (hereinafter referred to as "comparison specimen") is used to determine the surface roughness parameter of the measured piece by tactile and visual comparison with the surface of the measured piece having the same represented material and machining method. 2 Normative References The following documents contain provisions which, through reference in this part of GB/T 6060, constitute provisions of this standard. For dated reference, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For undated references, the latest edition of the document referred to applies. GB/T 1031-1995 Surface Roughness - Parameters and Their Values GB/T 6062-2002 Geometrical Product Specifications(GPS) - Surface Texture - Profile Method - Nominal Characteristics of Contact(Stylus)Instruments GB/T 10610-1998 Geometrical Product Specifications (GPS) - Surface Texture: Profile Method - Rules and Procedures for the Assessment of Surface Texture GB/T 17164-1997 Glossary of Terms Used in Dimensional Measuring Instruments - Product Terms

Foreword II 1 Scope 2 Normative References 3 Terms and Definitions 4 Methods of Manufacture 5 Surface Characteristics 6 Parameter Value of Surface Roughness 7 Evaluation of Surface Roughness 8 Structure and Dimension 9 Lay of Processing 10 Marking and Packaging