標準編號:	GB/T 70.5-2008
中文名稱:	內六角量規
英文名稱:	Gauging of hexagon sockets
中標分類:	J13    緊固件
行業分類:	GB    國家標準
ICS分類:	21.060.10 21.060.10    螺栓、螺釘、螺柱 21.060.10
發布機構:	中華人民共和國國家質量監督檢驗檢疫總局 中國家標準化管理委員會
發布日期:	2008-8-25
實施日期:	2009-2-1
標準狀態:	valid
替代舊標準:	JB/T 7384.5-1994 緊固件 內六角量規 JB/T 7384.6-1994 緊固件 內六角對角寬度通端量規
翻譯語言:	英文
文件格式:	PDF
中文字符數:	4,000 字
翻譯價格(元):	120.0
交付時間:	付款后 1 個工作日

1 Scope This Part specifies the gauging of hexagon sockets whose tolerance of hexagon sockets is in accordance with in the requirements of GB/T 3103.1. 2 Normative References The following normative documents contain provisions which, through reference in this Part, constitute provisions of this part. For dated reference, subsequent amendments to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this part are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative document is applicable to this part. GB/T 3103.1 Tolerances for Fasteners-Bolts, Screws, Studs and Nuts (GB/T 3103.1-2002, ISO 4759-1:2000, IDT) 3 Dimension See Figure 1 and Table 2 for gage dimension.See Table 1 for dimension indication rules

1 Scope 2 Normative References 3 Dimension 4 Designation