Luminaries - Part 2-1: Particular requirements - Fixed general purpose luminaries
1 Scope
This document specifies requirements for fixed general purpose luminaries.
This document applies to fixed general purpose luminaries for use with electric light sources on supply voltages not exceeding 1,000 V.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 7000.1 Luminaries - Part 1: General requirements and tests (GB/T 7000.1-2023, IEC 60598-1:2020, MOD)
3 Terms and definitions
For the purposes of this document, the terms and definitions defined in Part 1[ “Part 1” referred to in this document refers to GB/T 7000.1.]) apply.
4 General test requirements
Foreword i
Introduction iv
1 Scope
2 Normative references
3 Terms and definitions
4 General test requirements
5 Classification of luminaries
6 Marking
7 Construction
8 Creepage distances and clearances
9 Provision for earthing
10 Terminals
11 External and internal wiring
12 Protection against electric shock
13 Endurance tests and thermal tests
14 Resistance to dust, solid objects and moisture
15 Insulation resistance and electric strength, touch current and protective conductor current
16 Resistance to heat, fire and tracking
Annex A (Informative) Schedule of amended subclauses containing more serious/critical requirements which require products to be retested
