標準編號:	GB/T 709-2006
中文名稱:	熱軋鋼板和鋼帶的尺寸、外形、重量及允許偏差
英文名稱:	Dimension, Shape, Weight and Tolerances for Hot Rolled Sheets and
中標分類:	H46    鋼板、鋼帶
行業分類:	GB    國家標準
ICS分類:	77.140.50 77.140.50    扁平鋼和半成品 77.140.50
發布機構:	國家質量監督檢驗檢疫總局 國家標準化管理委員會
發布日期:	2006-11-01
實施日期:	1905-6-28
標準狀態:	superseded
被新標準替代:	GB/T 709-2019 熱軋鋼板和鋼帶的尺寸、外形、重量及允許偏差
被替代日期:	2020-2-1
替代舊標準:	GB 709-1988 熱軋鋼板和鋼帶的尺寸、外形、重量及允許偏差 GB/T 709-1988 熱軋鋼板和鋼帶的尺寸、外形、重量及允許偏差
翻譯語言:	英文
文件格式:	PDF
中文字符數:	14000 字
翻譯價格(元):	200.0
交付時間:	付款后 1 個工作日

1. Scope This national standard specifies the dimension, shape, weight and tolerances for hot-rolled sheets and plates. This national standard is applicable to the single-sheet rolled steel plate ( hereinafter referred to as "single rolled steel plate"), steel strip and its shear steel plates (hereinafter referred to as "continuously rolled steel plate") and longitudinal-cutting steel strip, whose rolling width is not less than 600mm. 2. Normative References The following standards contain provisions which, through reference in this text, constitute provisions of this national standard. For dated reference, subsequent amendments (excluding amending error in the text) to, or revisions of, any of these publications do not apply. However, the parties whose enter into agreement according to these specifications are encouraged to research whether the latest editions of these references are applied or not. For undated references, the latest edition of the normative document is applicable to this national standard.