標準編號:	GB/T 7633-1987
中文名稱:	門和卷簾的耐火試驗方法
英文名稱:	Fire resistance test method of door and shutter assemblies
行業分類:	GB    國家標準
發布機構:	國家標準局
發布日期:	1987-04-11
實施日期:	1987-10-1
標準狀態:	superseded
被新標準替代:	GB/T 7633-2008 門和卷簾的耐火試驗方法
被替代日期:	2009-5-1
翻譯語言:	英文
文件格式:	PDF
中文字符數:	3000 字
翻譯價格(元):	100.0
交付時間:	付款后 1 個工作日

1 Test Device 1.1 Furnace Fire resistance test of door and shutter assemblies is conducted with furnace. The furnace shall be capable of subjecting one side of the specimen to the heating conditions specified in Clauses 2 and the pressure conditions specified in Clauses 3, and shall meet the requirements of specimen mounting, test and observation. 1.2 Temperature testing device inside of the furnace Temperature in the furnace shall be measured by thermocouples of wire diameter 0.75 to 1.50 mm, and the quantity of thermocouples shall not less than 5. The thermojunction of thermocouple shall be protruded 25 mm above the end of sleeve; the test accuracy of temperature in the furnace shall be within ±15℃. 1.3 Temperature testing device of unexposed surface of specimen Thermocouple of wire diameter not greater than 0.70 mm shall be used for the temperature test of unexposed surface of specimen, the quantity is: not less than 8 for door and shutter assemblies with fire dampers, and not less than 5 for door and shutter assemblies without fire dampers. The test accuracy of temperature of specimen unexposed surface shall be within ±5℃. 1.4 Testing device of furnace pressure Furnace pressure shall be tested by piezometer and static pressure probe (see Figure 3) with the accuracy of ±1Pa.