標準編號:	GB/T 9160.1-2006
中文名稱:	滾動軸承 附件 第1部分：錐形襯套
英文名稱:	Rolling bearings - Accessories - Part 1: Tapered sleeves
中標分類:	J11    滾動軸承
行業分類:	GB    國家標準
ICS分類:	21.100.20 21.100.20    滾動軸承 21.100.20
發布機構:	國家質量監督檢驗檢疫總局 國家標準化管理委員會
發布日期:	2006-7-5
實施日期:	2006-12-1
標準狀態:	superseded
被新標準替代:	GB/T 9160.1-2017 滾動軸承 附件 第1部分：緊定套和退卸襯套
被替代日期:	2017-12-1
替代舊標準:	GB/T 6809.7-2005 往復式內燃機零部件和系統術語第7部分：調節系統
翻譯語言:	英文
文件格式:	PDF
中文字符數:	24000 字
翻譯價格(元):	1680.0
交付時間:	付款后 1 個工作日

1 Scope This Part of GB/T 9160 specifies designation methods, structural diagrams, dimensions, tolerances, requirements, inspection rules and measuring methods of adapter sleeves with taper 1:12 and withdrawal sleeves with tapers 1:12 and 1:30. This Part is applicable to adapter sleeves and withdrawal sleeves for rolling bearings of a number of dimension series as specified in GB/T 273.3-1999. 2 Normative References The following normative documents contain provisions, which through reference in this text, constitute provisions of this Part of GB/T 9160. For dated references, subsequent amendments to,(not including the wrong contents) or revisions of, any of these publications do not apply. However, parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. GB/T 192-2003 General Purpose Metric Screw Threads — Basic Profile (ISO 68-1:1998, MOD) GB/T 196-2003 General Purpose Metric Screw Threads — Basic Dimensions (ISO 724:1993, MOD) GB/T 272-1993 Rolling Bearings — Designation GB/T 273.3-1999 Rolling Bearings — Radial Bearings — Boundary Dimensions, General Plan (eqv ISO 15:1998) GB/T 275-1993 Shaft and Housing Fits for Rolling Bearings GB/T 307.2-2005 Rolling Bearings — Measuring and Inspection Principles and Methods (ISO 1132-2:2001, MOD) GB/T 699-1999 High Quality Carbon Structural Steels GB/T 1804-2000 General Tolerances — Tolerances for Linear and Angular Dimensions not Specific Shown (eqv ISO 2768-1:1989) GB/T 2516-2003 General Purpose Metric Screw Threads — Limit Deviations (ISO 965-3:1998, MOD) GB/T 5796.1-2005 Trapezoidal Screw Threads — Part 1: Profiles (ISO 2901:1993, MOD) GB/T 5796.3-2005 Trapezoidal Screw Threads — Part 3: Basic Dimensions (ISO 2904:1977, MOD) GB/T 5796.4-2005 Trapezoidal Screw Threads — Part 4: Tolerances (ISO 2903:1993, MOD) GB/T 6930-2002 Rolling Bearings — Vocabulary (ISO 5593:1997, IDT) GB/T 8597-2003 Rolling Bearings — Rust Proof Packaging JB/T 3574-1997 Rolling Bearings — Marking for Products JB/T 8921-1999 Rolling Bearings and Commercial Parts — Inspection Rules

Contents Foreword I 1 Scope 2 Normative References 3 Terms and Dimensions 4 Symbols 5 Designation Method 6 Marking Example 7 Dimension 8 Requirements 9 Measuring Method 10 Marking 11 Inspection Rules 12 Packaging Appendix A Appendix B