標準編號:	GJB 5053-2001
中文名稱:	潛艇液壓折倒天線通用規范
英文名稱:	General specification for submarine hydraulic folding Antenna
行業分類:	GJB    國家軍用行業標準
發布日期:	2001-11-23
實施日期:	2002-3-1
標準狀態:	valid
翻譯語言:	英文
文件格式:	PDF
中文字符數:	9000 字
翻譯價格(元):	1000.0
交付時間:	付款后 1 個工作日

General specification of hydraulic foldable antenna for submarine 1 Scope This specification specifies the requirements, quality assurance regulations and delivery preparation of hydraulic foldable antenna for submarine(hereinafter referred to as the equipment). This specification is applicable to the design, production and acceptance of hydraulic foldable antenna for submarine. 2 Normative references GJB 151A-97 Electromagnetic emission and susceptibility requirements for military equipment and subsystems GJB 152A-97 Measurement of electromagnetic emission and susceptibility for military equipment and subsystems GJB 367.1-87 General specification for military communication equipments - Requirements for design and manufacture GJB 367.2-87 General specification for military communication equipments - Environmental test methods GJB 367.4-87 General specification for military communication equipments - Acceptance rules GJB 367.5-87 General specification for military communication equipments - Require of package carriage and storage 3 Requirements 3.1 Qualification The products provided according to this specification shall be products that have been identified as qualified or approved. 3.2 Design In addition to the relevant requirements of Clause 1 of GJB 367.1, the equipment shall be designed to meet the following requirements: a) The equipment has the function of receiving and sending communication signals and/or receiving navigation signals when the submarine is on the surface. b) The equipment consists of antenna assembly, foldable structure, hydraulic assembly and controller. Among them, the antenna assembly is generally composed of antenna body, insulator, watertight RF cable and connector and other components. The foldable structure is generally composed of foldable components, pivots, bases and other components. Hydraulic assembly is generally composed of working cylinders, hydraulic manifold blocks and other components, and isolation cylinders may be added when necessary. The controller is generally composed of operation display part and control circuit part. 3.3 Power supply AC: 220 (1 ± 10%) V and 50 (1 ± 5%) Hz; Hydraulic power 6 MPa ~ 10 MPa 3.4 Structure

Foreword i 1 Scope 2 Normative references 3 Requirements 3.1 Qualification 3.2 Design 3.3 Power supply 3.4 Structure 3.5 Materials 3.6 Dimensions 3.7 Weight 3.8 Color 3.9 Marks and designations of products 3.10 Appearance 3.11 Performance characteristics 3.12 Detailed requirements for parts and components 3.13 Environmental requirements 3.14 Electromagnetic compatibility 3.15 Reliability and maintainability 3.16 Interchangeability and Safety 4 Quality assurance requirements 4.1 Responsibility for inspection 4.2 Compliance responsibility 4.3 Inspection classification 4.4 Inspection conditions 4.5 Appraisal inspection 4.6 Quality consistency inspection 4.7 Inspection methods 5 Delivery preparation 5.1 Storage and Packaging 5.2 Packing 5.3 Transportation and storage 5.4 Marking 6 Notes 6.1 Intended use 6.2 Ordering documents information

1 范圍 本規范規定了潛艇液壓折倒天線(以下簡稱設備)的要求、質量保證規定和交貨準備等。 本規范適用于潛艇液壓折倒天線的設計、生產和驗收。 2 引用文件 GJB 151A-97 軍用設備和分系統電磁發射和敏感度要求 GJB 152A-97 軍用設備和分系統電磁發射和敏感度測量 GJB 367.1-87 軍用通信設備通用技術條件 設計制造要求 GJB 367.2-87 軍用通信設備通用技術條件 環境試驗方法 GJB 367.4-87 軍用通信設備通用技術條件 驗收規則 GJB 367.5-87 軍用通信設備通用技術條件 包裝、運輸和貯存要求 3 要求 3.1 合格鑒定 按本規范提供的產品應是經鑒定合格或定型批準的產品。 3.2 設計 設備的設計除應符合GJB 367.1的第1章有關要求外，還應符合以下要求： a)設備在潛艇水面狀態下，具有收發通信信號和/或接收導航信號的功能。 b)設備由天線組件、折倒機構、液壓組件和控制器等組成。其中，天線組件一般由天線體、絕緣子、水密射頻電纜、水密射頻電纜連接器等部件組成。折倒機構一般由折倒組件、樞軸、基座等部件組成。液壓組件一般由工作油缸、液壓集成塊等部件組成，必要時可增設隔離油缸。控制器一般由操作顯示部分和控制電路部分組成。 3.3 能源 交流電源 220×(1±10％)V，50×(1±5％)Hz 液壓源 6MPa～10MPa 3.4 結構 結構應符合GJB 367.1中1.15的要求。 3.5 材料 所用的材料應符合GJB 367.1中3.4的要求。 3.6 尺寸 尺寸按產品圖樣和技術文件的規定。 3.7 重量 重量按產品圖樣和技術文件的規定。 3.8 顏色 外表顏色按產品技術文件的規定。 3.9 產品的標志和代號 標志和代號應符合GJB 367.1中1.21的要求。 3.10 外觀質量 外表面不應有影響使用、操作或安全的凹痕、碰傷、裂痕、變形等缺陷；涂鍍層不應起泡、龜裂和脫落；金屬零件不應有銹蝕和其它機械損傷；緊固零件應無松動。 3.11 性能特性 3.11.1 設備運轉 天線體豎起和倒下時，應工作平穩，不應有異常噪聲及豎起和倒下不到位等現象；控制器應正確顯示。 3.11.2 極限位置控制 天線體豎起或倒下到位時，折倒機構應能立即停止動作，控制器應正確顯示。 3.11.3 豎起和倒下時間 天線體的豎起和倒下時間一般應小于45s，也可按產品技術文件的規定。 3.11.4 絕緣電阻 天線體出水豎起1min后，通信用設備的天線組件(帶有匹配網絡的天線組件除外)的絕緣電阻應不小于10MΩ，導航用設備的天線組件絕緣電阻應不小于2MΩ。 3.11.5 方向性圖 設備的水平方向性圖為全向，最大不圓度應不大于±1.5dB。 3.11.6 電壓駐波比 設備的電壓駐波比按產品技術文件的規定。 3.11.7 增益 設備的增益按產品技術文件的規定。 3.11.8 工作頻率 通信用設備的工作頻率高頻段一般為3MHz～30MHz，甚高頻和超高頻段一般為30MHz～88MHz、100MHz～174MHz、225MHz～400MHz，也可按產品技術文件的規定。 導航用設備的工作頻率一般為100kHz，也可按產品技術文件的規定。 3.11.9 承受功率容量 按產品技術文件的規定。 3.12 零部件詳細要求 3.12.1 天線組件 3.12.1.1 天線體的直徑按產品技術文件的規定；天線體長度為4m或6m，也可按產品技術文件的規定。 3.12.1.2 絕緣子在4.4MPa(靜)水壓下應無泄漏。 3.12.1.3 水密射頻電纜應符合下列要求： a)在4.4MPa(靜)水壓下，橫向和縱向應無泄漏； b)特性阻抗(50±2)Ω； c)絕緣電阻應不小于104MΩ·km。 d)其它按產品技術文件的規定。 3.12.1.4 天線用水密射頻電纜連接器在4.4MPa(靜)水壓下應無泄漏。 3.12.2 折倒機構