1 Scope
This standard specifies the term and definition, classification, requirements, test methods, inspection rules, marking, packaging, transportation and storage of black rain boots (shoes).
This standard is applicable to waterproof black rain boots (shoes) made of elastic material for general use.
This standard is not applicable to industrial boots and special rubber boots (shoes) for labor protection.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.
GB/T 528-2009 Rubber, Vulcanized or Thermoplastic - Determination of Tensile Stress-strain Properties (idt ISO 37:2005)
GB/T 531.1-2008 Rubber Vulcanized or Thermoplastic - Determination of Indentation Hardness - Part 1: Duromerer Method (Shore Hardness) (idt ISO 7619-1:2004)
GB/T 532-2008 Rubber Vulcanized or Thermoplastic - Determination of Adhesion to Textile Fabric (idt ISO 36:2005)
GB/T 1689-1998 Rubber Vulcanized - Determination of Abrasion Resistance (Akron Machine)
GB/T 2941-2006 Rubber - General Procedures for Preparing and Conditioning Test Pieces for Physical Test Methods (idt ISO 23529:2004)
GB/T 3293.1 Shoes Sizes (idt ISO 9407:1991)
GB/T 3293 Chinese Last Systems
GB/T 3512-2001 Rubber, Vulcanized or Thermoplastic - Accelerated Ageing and Heat Resistance Tests - Air-oven Method
HG/T 2198-1991 Rubber Vulcanized - The General Requirements for the Physical Test Method
HG/T 2403 Test Rule, Marking, Packing, Transport, Storage for Rubber Shoes
HG/T 3664-2000 Test Method for the Resistance of All Rubber Boots (Shoes) to Water Penetration (neq ISO 2023:1994)
Foreword i
1 Scope
2 Normative References
3 Term and Definition
4 Requirements
5 Test Method
6 Inspection Rules, Marking, Packaging, Transportation and Storage
Annex A (Normative) Determination for Elongation of Paint Film
