1 Scope
This standard specifies the terms and definitions, classification and model designation, requirements, test methods, inspection, marking, packaging, transportation and storage for lithium-ion battery assembly.
This standard is applicable to the systems which are composed of lithium-ion battery of 6 A?h or above.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 156-2007 Standard Voltage
GB 2893-2008 Safety Colors
GB 2894-2008 Safety Signs and Guideline for the Use
GB 4208-2008 Degrees of Protection Provided by Enclosure (IP Code)
GB 4824-2004 Industrial, Scientific and Medical (ISM) Radio-frequency Equipment – Electromagnetic Disturbance Characteristics – Limits and Methods of Measurement
GB/T 5465.2-2008 Graphical Symbols for Use on Electrical Equipment – Part 2: Graphical Symbols
GB/T 17626.2-2006 Electromagnetic Compatibility – Testing and Measurement Techniques – Electrostatic Discharge Immunity Test
GB/T 17626.3-2006 Electromagnetic Compatibility-Testing and Measurement Techniques – Radiated Radio-frequency Electromagnetic Field Immunity Test
GB/T 17626.4-2008 Electromagnetic Compatibility – Testing and Measurement Techniques – Electrical Fast Transient/Burst Immunity Test
GB/T 17626.5-2008 Electromagnetic Compatibility – Testing and Measurement Techniques – Surge(impact) Immunity Test
GB/T 17626.6-2008 Electromagnetic compatibility – Testing and Measurement Techniques – Immunity to Conducted Disturbances Induced by Radio-frequency Fields
GB/T 18858.3-2002 Low-voltage Switchgear and Controlgear – Controller-device Interface (CDI) – Part 3: DeviceNet
JB/T 11138-2011 Interface and Communication Protocol of Lithium-ion Battery Assembly
JB/T 11139-2011 General Requirement of Lithium-ion Manganese Oxide Battery Module
JB/T 11140-2011 General Requirement of Lithium-ion Phosphate Battery Module
JB/T 11141-2011 General Requirement of Lithium-ion Phosphate Battery Module
JB/T 11142-2011 General Requirement of Charging Equipment of Lithium-ion Battery
SJ/T 11364-2006 Marking for Control of Pollution Caused by Electronic Information Products
3 Terms and Definitions
For the purposes of this document, the following terms and definitions apply.
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification and Model Designation
5 Technical Requirements
6 Test Method
7 Inspection
8 Marking, Packaging, Transportation and Storage
Appendix A (Normative) Functional Configuration of Lithium-ion Battery Management System
Appendix B (Normative) Composition of Lithium-ion Battery Assembly
Appendix C (Normative) Discharge Control Mode of Lithium-ion Battery Module and Assembly
Appendix D (Informative) Consistency Test Method of Lithium-ion Battery
