標準編號:	JB/T 6062-2007
中文名稱:	無損檢測 焊縫滲透檢測
英文名稱:	Non-Destructive Testing—Penetrant Testing of Welds
中標分類:	J04    基礎標準與通用方法
行業分類:	JB    機械行業標準
ICS分類:	19.100 19.100    無損檢測 19.100
發布機構:	國家發展和改革委員會
發布日期:	2007-08-01
實施日期:	2008-1-1
標準狀態:	abolished
作廢日期:	2017-05-12
替代舊標準:	JB/T 6062-1992
翻譯語言:	英文
文件格式:	PDF
中文字符數:	4000 字
翻譯價格(元):	100.0
交付時間:	付款后 1 個工作日

This standard specifies the basic rules to detect the surface opening imperfection in metal weld by using penetration testing, it also specifies the acceptance level showed by penetration detect. The acceptance level specified by this standard is used for manufacturing testing; it also can be used for testing in active service if it was considered appropriate. The acceptance level in this standard is based on the method specified in JB/T 9218 and the detection capability that is expected to reach according to the parameter recommended by this standard. The acceptance level related to the weld standard, application standard, technical conditions and laws & regulation more information to display. The acceptance level can be obtained in the product or the application standard. The basic rules used when non-destructive testing is applied according to GB/T 5616 shall be applicable to this standard.

Foreword II 1 Scope 2 The normative references 3 Terminologies and definitions 4 Safety cautions 5 General provisions 5.1 Information needed prior to detection 5.2 Additional information prior to detection 5.3 Personnel qualification 5.4 Surface condition and preparation 6 Testing 7 Testing parameter 7.1 Summary 7.2 Sensitivity 7.3 Surface condition 7.4 Process and technology 8 Acceptance level 8.1 Summary 8.2 Assessment of indication 8.3 Group indication 8.4 Removal of defect