標準編號:	JB/T 6313.3-2011
中文名稱:	電工銅編織線 第3部分：直紋編織線
英文名稱:	Braided copper wires for electrical purposes- Part 3:Plain braided wires
中標分類:	K11    裸電線
行業分類:	JB    機械行業標準
ICS分類:	29.060.10 29.060.10    電線 29.060.10
發布機構:	工業和信息化部
發布日期:	2011-5-18
實施日期:	2011-8-1
標準狀態:	valid
替代舊標準:	JB/T 6313.3-1992
翻譯語言:	英文
文件格式:	PDF
中文字符數:	5000 字
翻譯價格(元):	360.0
交付時間:	付款后 1 個工作日

1 Scope This part of JB/T 6313 specifies the type and specification, technical requirements and inspection rules for plain braided copper wires. This part is applicable to plain braided copper wires. 2 Normative References The following standards contain provisions which, through reference in this part of JB/T 6313, constitute provisions of this part. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. GB/T 3048.4-2007 Test Methods for Electrical Properties of Electric Cables and Wires—Part 4: Test of DC Resistance of Conductors GB/T 4909.2-2009 Test Methods for Bare Wires—Part 2: Measurement of Dimensions JB/T 6313.1-2011 Braided Copper Wires for Electrical Purposes—Part 1: General

Foreword i 1 Scope 2 Normative References 3 Type 4 Specification 5 Technical Requirements 6 Inspection Rules