標準編號:	JC 692-1998
中文名稱:	反滲透水處理裝置用玻璃纖維增強塑料壓力殼體
英文名稱:	Fiberglass reinforced plastics pressure shells used in reverse osmosis water treatment unit
中標分類:	Q23    纖維增強復合材料
行業分類:	JC    建筑材料行業標準
ICS分類:	83.120 83.120    增強塑料 83.120
發布機構:	國家建筑材料工業局
發布日期:	1998-7-16
實施日期:	1999-1-1
標準狀態:	valid
翻譯語言:	英文
文件格式:	PDF
中文字符數:	10000 字
翻譯價格(元):	600.0
交付時間:	付款后 1 個工作日

Fiberglass reinforced plastics pressure shells intended to be used in reverse osmosis water treatment unit 1 Scope This standard specifies the classification, labeling, raw materials, technical requirements, test methods and inspection rules of fiberglass reinforced plastics (hereinafter referred to as FRP) pressure shells intended to be used in reverse osmosis water treatment unit. It is applicable to FRP pressure shells intended to be used in reverse osmosis water treatment unit made by wound process by taking fiberglass and its products as reinforced material and epoxy resin as base. Its long-term service temperature ranges from -10℃ to +50℃. 2 Normative references The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. Upon publication of this standard, all the editions cited are valid. All standards are subject to revision, and all parties using this standard are encouraged to investigate the possibility of applying the latest editions of the following standards. GB/T 2576-89 Test method for insoluble matter content of resin used in fiber reinforced plastics GB/T 2577-89 Test method for resin content of glass fiber reinforced plastics GB/T 2828-89 Sampling procedures and tables for lot-by-lot inspection by attributes (Apply to inspection of successive lots or batches) GB/T 3354-82 Test method for tensile properties of oriented fiber reinforced plastics GB/T 3356-82 Test method for flexural properties of unidirectional fiber reinforced plastics GB/T 3357-82 Test method for interlaminar shear strength of unidirectional fiber reinforced plastics GB/T 3854-83 Test method for hardness of fiber reinforced plastics by means of Barcol impressor GB/T 4550-84 Preparation of unidirectional orientated fiber reinforced plastic plates for test purposes GB/T 5351-85 Test method for short-time hydraulic failure pressure of fiber-reinforced thermosetting plastic pipe GB/T 13657-92 Bipenol-A epoxy resins JC/T 277-92 Alkali-free twistless fiberglass roving JC 552-94 Filament-wound thermosetting resin pressured pipe 3 Definitions For the purposes of this standard, the following definitions apply. 3.1 spiral-wound reverse osmosis——reverse osmosis membrane module with wound structure 3.2 hollow fiber reverse osmosis——reverse osmosis membrane module composed of hollow fibers 4 Classification

Contents Foreword i 1 Scope 2 Normative references 3 Definitions 4 Classification 5 Raw materials 6 Technical requirements 7 Test methods 8 Inspection rules 9 Marking, packaging, transportation and storage Annex A (Normative) Measuring method for dimension