1 This Standard specifies property test method for bitumen and bituminous mixtures, including bitumen selection, test method, test data rearrangement, data analysis and test precision requirement for bitumen and bituminous mixtures.
2 This Standard is applicable to phases of design, construction, curing, quality inspection and such works acceptance as highway bituminous pavement.
3 Technical requirements for bituminous materials and bituminous mixtures shall comply with current relevant technical codes.
4 Equipments used in this Standard shall be detected by corresponding determination department or detection mechanism, only after being confirmed to be eligible; it shall be corrected in service. Metering graduation interval should not be over a year unless otherwise being specified. Where the equipments do not meet the requirements, the test results shall not be used as the criteria. Detection equipment stresses on quality, temperature, length, load, speed, time, and standard penetration needle, softening point iron shot, screen, press, sensors and a variety of admeasuring apparatus for die dimensions. The standard screens adopted by this Standard are square mesh screen.
5 Units of measurement shall be national legal ones. If the imported or the original equipments are not in line with legal units for measurement in China, they shall be reduced to legal units of measurement while being used.
6 Calculation and representation for test results shall comply with the precisions for effective figures. Precision or permissible difference for test method is represented by standard deviation or error of the repetitive test and reproducibility testing results. The accuracy or error of determined results shall comply with requirement for the precision or permissible difference specified in this Standard.
7 The testing staffs shall be provided with elementary knowledge for bituminous material and they shall abide by specifications for safe operation and environmental protection.
8 Test items not specified in this Standard may be referred to relevant domestic and foreign standard test methods, but it shall be explained clearly in the test report.
9 When admeasuring apparatus and equipments differs from those specified in this Standard, they must be detected and confirmed to be eligible. Their test engineering index, test precision and fundamental test condition shall comply with this Standard.
Foreword II
1 General provision
2 Terminologies and symbols
3 Bitumen test
T 0601—2000 Bitumen Sampling Method
T 0602—1993 Preparation Method for Bitumen
T 0603—1993 Bitumen Density and Specific Gravity Test
T 0604—2000 Bitumen Penetration Test
T 0605—1993 Bitumen Ductility Test
T 0606—2000 Bituminous Softening-point Test
T 0607—1993 Solubility Test of Bitumen
T 0608—1993 Loss on Heating Test of Bitumen
T 0609—1993 Bitumen Membrane Heating Test
T 0610—1993 Heating Test of the Bitumen Rotating Membrane
T 0611—1993 Test for Bitumen Flash Point and Burning Point (Cleveland Open Cup Method)
T 0612—1993 Test for Moisture of Bitumen
T 0613—1993 Breaking point Test of Bitumen (Frasnian Method)
T 0614—1993 Bitumen Ash Content Test
T 0615—2000 Wax Content Test of Bitumen (Distillation Method)
T 0616—1993 Adhesiveness Test for Bitumen and Coarse Mineral Aggregate
T 0617—1993 Bitumen Chemical Constituent Test (Trimaceral Method)
T 0618—1993 bitumen chemical constituent test (Four Components Method)
T 0619—1993 Test for Kinematic Viscosity in Bitumen (Capillary Tube Method)
T 0620—2000 Test for Kinematic Viscosity in Bitumen (Vacuum Depressurizing Capillary Tube Method)
T 0621—1993 Bitumen Standard Viscosity Test (Road Asphalt Standard Viscosimeter Method)
T 0622—1993 Englar Viscosity Test (Englar Viscosimeter Method)
T 0623—1993 Siybolt Viscosity Test of Bitumen (Saybolt Heavy Oil Viscosimeter Method)
T 0624—1993 Toughness and Tenacity Test of Bitumen
T 0625—2000 Brookfield Rotating Viscosity Test (Brookfield Type Viscometer Method)
T 0626—2000 Measuring Method for Asphaltic Acid
T 0631—1993 Bitumen Floatability Test
T 0632—1993 Distillation Test for Liquefied Petrolatum Bitumen
T 0633—1993 Flash Point Test for Liquefied Petrolatum Bitumen (Tag Open Cup)
T 0641—1993 Coal Pitch Distillation Test
T 0642—1993 Tar Acid Content Test for Coal Pitch
T 0643—1993 Coal Pitch Phenol Content Test
T 0644—1993 Coal Asphalt Naphthalene Content Test (Chromatographic Column Method)
T 0645—1993 coal asphalt naphthalene content test (Vacuum Filtration)
T 0646—1993 Coal Asphalt Undissolved Substance Content Test
T 0651—1993 Emulsified Asphalt Evaporated Residue Content Test
T 0652—1993 Residual Content Test on Emulsified Asphalt Sifter
T 0653—1993 Ionic Charge Test of Emulsified Asphalt Atom
T 0654—1993 Adhesiveness Test of Emulsified Asphalt and Mineral Aggregate
T 0655—1993 Emulsified Asphalt Stability in Storage Test
T 0656—1993 Emulsified Asphalt Cryogenic Storage Stability Test
T 0657—1993 Emulsified Asphalt Cement Intermix Test
T 0658—1993 Emulsified Asphalt Emulsion Breaking Speed Test
T 0659 1993 Adhesiveness Test of Emulsified Asphalt and Mineral Aggregate
T 0660—2000 Cementation Test of the Asphalt and Stone at Low Temperature
T 0661—2000 Polymer Modified asphalt Isolation Test
T 0662—2000 Asphalt Recovery of Elasticity Test
T 0663—2000 Merit Rating Test for Asphalt Antistripping Agent
4 Asphalt Mixture Test
T 0701-2000 Asphalt Mixture Sampling
T 0702—2000 Fabrication method of asphalt mixture specimen (Compaction)
T 0703—1993 Manufacturing Method of Bitumen Mixtures (Rolling Method)
T 0704—1993 Asphalt Mixture Sample Fabricating Method (Static Pressure Method)
T 0705—2000 Density Test of Compact Bituminous Mixtures (Surface Dry Method)
T 0706—2000 Density Test of Compact Bituminous Mixtures (Submerged Mass Method)
T 0707—2000 Density Test of Compact Bituminous Mixtures (Wax Sealing Method)
T 0708—2000 Density Test of Compact Bituminous Mixtures (Volumetric Method)
T 0709—2000 Marshall Stability Test of Bituminous Mixtures
T 0710—2000 Marshall Test for Core of Bituminous Pavement
T 0711—1993 Theoretical Maximal Specific Gravity of Bituminous Mixtures (Vacuum Method)
T 0712—1993 Test for Theoretical Maximal Specific Gravity of Bituminous Mixtures (Solvent Method)
T 0713—2000 Uniaxial Compression Test of Bituminous Mixtures (Cylinder Method)
T 0714—1993 Uniaxial Compression Test of Bituminous Mixtures (Prismoid Method)
T 0715—1993 Bending Test of Bituminous Mixtures
T 0715—1993 Bending Test of Bituminous Mixtures
T 0716—1993 Splitting Test of Bituminous Mixtures
T 0717—1993 Saturated Water Content Test of Bituminous Mixtures
T 0718—1993 Triaxial Compression test of Bituminous Mixtures (Closed Circuit Method)
T 0719—1993 Rutting test of bituminous mixtures
T 0720—1993 Test for Linear Shrinkage Coefficient of Bituminous Mixtures
T 0721—1993 Test for Asphalt Content in Bitumen Mixtures (Ray Method)
T 0722—1993 Test for Asphalt Content in Bitumen Mixtures (Centrifugal Separation Method)
T 0723—1993 Test for Asphalt Content in Bitumen Mixtures (Reflux Extraction Apparatus Method)
T 0724—1993 Test for Asphalt Content in Bitumen Mixtures (Soxhlet Aparatus Method)
T 0725—2000 Gradation Test Methods of Mineral Aggregate in Bitumen Mixtures
T 0726—1993 Recovery Method of Bitumen from Bitumen Mixtures (Abson Method)
T 0727—1993 Method for Recycling Bitumen from Bitumen Mixtures (Rotary Evaporator Method)
T 0728—2000 Bending Creep Test of Bitumen Mixtures
T 0729—2000 Freeze-thaw Splitting Test of Bitumen Mixtures
T 0730—2000 Water Penetration Test of Bitumen Mixtures
T 0731—2000 Depth Test for the Superficial Structure of Bitumen Mixtures
T 0732—2000 Schellenberg Binder Drainage Test of Bitumen Mixtures
T 0733—2000 Cantabro Test of Bitumen Mixtures
T 0734—2000 Hot-mixed Bitumen Mixtures Accelerated Aging Method
T 0751—1993 Emulsified Asphalt Slurry-sealed Mixture Consistency Test
T 0752—1993 Emulsified Asphalt Slurry-sealed Mixture Wet-track Abrasion Test
T 0753—1993 Emulsified Asphalt Slurry-sealed Mixture Initial Setting-time Test
T 0754—2000 Emulsified Asphalt Slurry-sealed Mixture Curing Time Test
T 0755—2000 Emulsified Asphalt Slurry-sealed Mixture Grinding Test
