標準編號:	NB/T 47013.6-2015
中文名稱:	承壓設備無損檢測 第6部分:渦流檢測
英文名稱:	Nondestructive Testing of Pressure Equipments Part 6:Eddy Current Testing
行業分類:	NB    能源行業標準
發布機構:	國家能源局
發布日期:	2015-04-02
實施日期:	2015-9-1
標準狀態:	valid
替代舊標準:	JB/T 4730.6-2005 承壓設備無損檢測 第6部分 渦流檢測
翻譯語言:	英文
文件格式:	PDF
中文字符數:	32000 字
翻譯價格(元):	1300.0
交付時間:	付款后 1 個工作日

1 Scope 1.1 This Part of NB/T 47013 specifies the requirements for the eddy current testing methods and quality classification of pressure equipments. 1.2 This Part is applicable to the eddy current testing for the surface and near surface flaws of metallic tubular products, spare parts and welded joints having electric conductivity used for the pressure equipments in-fabrication and in-service, and is also applicable to the measurement of surface cover layer thickness of metallic substrate with magnetic method and eddy current method. 1.3 The eddy current testing for the supporting members and structural members relevant to pressure equipments may also be made reference to this Part. 2 Normative References The following documents for the application of this document are essential. Any dated reference, just dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document. GB/T 5126 Eddy Current Inspection Method for Cold Drawn Thin Wall Tubes of Aluminum and Aluminum Alloy GB/T 5248 Copper and Copper Alloy - Seamless Tubes - Eddy Current Testing Method GB/T 7735 Steel Tubes - The Inspection Method on Eddy Current Test GB/T 12604.6 Non-destructive Testing - Terminology - Terms Used in Eddy Current Testing GB/T 12969.2 Method of Eddy Current Inspection for Titanium and Titanium Alloy Tubes GB/T 14480.3 Non-destructive Testing - Equipment for Eddy Current Examination - Part 3: System Characteristics and Verification NB/T 47013.1 Nondestructive Testing of Pressure Equipments - Part 1: General Requirements NB/T 47013.3 Nondestructive Testing of Pressure Equipments - Part 3: Ultrasonic Testing NB/T 47013.4 Nondestructive Testing of Pressure Equipments - Part 4: Magnetic Particle Testing NB/T 47013.5 Nondestructive Testing of Pressure Equipments - Part 5: Penetrant Testing NB/T 47013.10 Nondestructive Testing of Pressure Equipments - Part 10: Ultrasonic Time of Flight Diffraction Technique YB/T 145 Die Casting and Size Measurement Method of Artificial Defects on the Reference Sample Pipes 3 Terminologies and Definitions For the purpose of this Part, the terminologies and definitions defined in GB/T 12604.6 and NB/T 47013.1 apply.

Foreword I 1 Scope 2 Normative References 3 Terminologies and Definitions 4 General Requirements 5 Eddy Current Testing for Ferromagnetic Tubular Products 6 Eddy Current Testing for Non-ferromagnetic Metal Tubular Products 7 Far Field Eddy Current Testing for Ferromagnetic Heat Exchange Tube In-Service 8 Eddy Current Testing for Non-Ferromagnetic Heat Exchange Tube In-Service 9 Eddy Current Testing for the Parts of Probe coil 10 Eddy Current Testing for Welds with Probe Coil 11 Measurement of Cover Layer Thickness 12 Evaluation of Testing Results 13 Testing Record and Report Appendix A (Normative) Reference Sample for Eddy Current Testing over Flaw Characteristics of Ferromagnetic Tubes for Pressure Equipments In-service Appendix B (Normative) Type III Reference Sample for Eddy Current Testing over Non-ferromagnetic Tubes for Pressure Equipments In-service