標準編號:	QB/T 1097-2010
中文名稱:	鋼制文件柜
英文名稱:	Stell filing cabinet
中標分類:	Y81    家具制品
行業分類:	QB    輕工行業標準
ICS分類:	97.140 97.140    家具 97.140
發布機構:	工業和信息化部
發布日期:	2011-1-21
實施日期:	2011-4-1
標準狀態:	valid
替代舊標準:	QB/T 1097-1991 鋼制文件柜
翻譯語言:	英文
文件格式:	PDF
中文字符數:	10000 字
翻譯價格(元):	600.0
交付時間:	付款后 1 個工作日

Foreword Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative. This standard is prepared in accordance with the rules given in GB/T 1.1-2009 Directives for standardization - Part 1: Structure and drafting of standards. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. The issuing body of this document shall not be held responsible for identifying any or all such patent rights. This is a revision of QB/T 1097-1991 Steel filing cabinet. In addition to a number of editorial changes, the following technical changes have been made with respect to QB/T 1097-1991: ——The “Terms and definitions” is added (see Clause 3); ——The product classification is modified (see Clause 4, Clause 3 of Edition 1991); ——The requirements for overall dimension are deleted (see 3.1 and 3.2 of Edition 1991); ——The requirements for main dimension are added (see 5.1.1); ——The requirements for overall dimension deviation are modified (see 5.1.2; 4.1 of Edition 1991); ——The requirements for geometrical tolerance are modified. The requirements for flatness, place difference degree, sag, swing range, touchdown stability, drawer depth are added, the requirements for vertical degree of adjoining sides and parting are modified; the requirements for planeness and parallelism are deleted (see 5.2; 4.2 and 4.8.2 of Edition 1991); ——The material requirements are deleted (see 4.3 of Edition 1991); ——The requirements for thickness of steel plate are added (see 5.3); ——The “process requirements” is modified as “appearance requirements”; the requirements for welded parts, stamped parts, spray-fused coating, electroplated parts, plastic parts and glass parts are modified; the appearance requirements for riveted parts and other parts are added (see 5.4; 4.4.1, 4.4.2, 4.4.3, 4.4.4, 4.5, 4.6 and 4.7 of Edition 1991); ——The requirements for locks are modified (see 5.5.2 and 5.5.3; 4.8.7 of Edition 1991); ——The requirements for formaldehyde emission of wooden parts are added (see 5.6); ——The requirements for physical and chemical properties of paint film are modified, with the “physical and chemical properties of paint film” modified to “physical and chemical properties of coating”; the requirements for corrosion resistance, salt spray resistance of electroplated coating are modified; the requirements for coating thickness are deleted (see 5.7; 4.4.5 and 4.5 of Edition 1991); ——The requirements for mechanical property are added (see 5.8); ——The test methods are modified. The determinations of vertical degree of adjoining sides, parting, appearance and physical and chemical properties of surface coating are modified; the determinations of flatness, place difference degree, sag and swing range of drawer, touchdown stability, deviation between drawer depth and internal depth of product, other requirements, steel plate thickness, formaldehyde emission and mechanical properties of wooden parts are added; the inspections of planeness and parallelism, the determination of coating thickness and the stiffness test are deleted (see Clause 6; Clause 5 of Edition 1991); ——The inspection rules are modified (see Clause 7; Clause 6 of Edition 1991). ——The marking, instructions for use, packaging, transportation and storage are modified (see Clause 8; Clause 7 of Edition 1991). This standard was proposed by the China National Light Industry Council. This standard is under the jurisdiction of National Furniture Standardization Center of the People's Republic of China. This standard replaces the former professional standard QB/T 1097-1991 Steel filing cabinet issued by the former Ministry of Light Industry from the implementation date of this standard. Steel filing cabinet 1 Scope This standard specifies the terms and definitions, product classification, requirements, test methods, inspection rules, marking, instructions for use, packaging, transportation and storage of steel filing cabinet. It is applicable to the steel filing cabinet. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated reference, only the edition cited applies. For undated references, the latest edition of the referenced documents (including any amendments) applies. GB/T 1720 Method of test for adhesion of paint films GB/T 1730 Paints and varnishes - Pendulum damping test GB/T 1732 Determination of impact resistance of film GB/T 2828.1-2003 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection GB/T 3325-2008 Metal furniture - General technical requirements GB 5296.6 Instructions for use of products of consumer interest - Part 6: Furniture GB/T 10357.4 Test of mechanical properties of furniture - Stability of storage units GB/T 10357.5 Test of mechanical properties of furniture - Strength and durability of storage units GB/T 13667.1-2003 General specification for steel book shelves GB 18584 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture GB 21556-2008 General safety technique requirement of locks QB/T 3826-1999 Corrosion-resistant testing method of the metal deposits and conversion coatings for the light industrial products - Neutral salt spraying test (NSS) 3 Terms and definitions For the purposes of this document, the terms and definitions given in GB/T 3325 and the following apply.

Foreword i 1 Scope 2 Normative references 3 Terms and definitions 4 Product classification 5 Requirements 6 Test methods 7 Inspection rules 8 Marking, instructions for use, packaging, transportation and storage Annex A (Informative) Mechanical property test requirements

ICS 97.140 分類號：Y81 備案號：31042-2011 QB 中華人民共和國輕工行業標準 QB／T 1097—2010 代替QB／T 1097—1991 鋼制文件柜 Steel filing cabinet 2010-12-29發布 2011-04-01實施 中華人民共和國工業和信息化部 發布 前言 本標準按GB／T 1.1—2009《標準化工作導則 第1部分：標準的結構和編寫》編制。 請注意本文件的某些內容可能涉及專利。本文件的發布機構不承擔識別這些專利的責任。 本標準是對QB／T 1097—1991《鋼制文件柜》的修訂。 本標準與QB／T 1097—1991相比，除編輯性修改外，主要技術變化如下： ——增加了“術語和定義”(見3)； ——修改了產品分類(見4，1991年版的3)； ——刪除了外形尺寸要求(見1991年版的3.1和3.2)； ——增加了主要尺寸要求(見5.1.1)； ——修改了外形尺寸偏差要求(見5.1.2，1991年版的4.1)； ——修改了形狀和位置公差要求。增加了平整度、位差度、下垂度、擺動度、著地平穩性、抽屜深度要求，修改了鄰邊垂直度、分縫要求，刪除了平面度、平行度要求(見5.2，見1991年版的4.2和4.8.2)； ——刪除了材料要求(見1991年版的4.3)； ——增加了鋼板厚度要求(見5.3)； ——將“工藝要求”修改為“外觀要求”，修改了焊接件、沖壓件、噴涂層、電鍍件、塑料件、玻璃件要求，增加了鉚接件和其他外觀要求(見5.4，1991年版的4.4.1、4.4.2、4.4.3、4.4.4、4.5、4.6和4.7) ——修改了鎖具要求(見5.5.2和5.5.3，1991年版的4.8.7)； ——增加了木質件甲醛釋放量要求(見5.6)； ——修改了漆膜理化性能要求，將“漆膜理化性能”修改為“涂層理化性能”，修改了耐腐蝕、電鍍層抗鹽霧要求，刪除了鍍層厚度要求(見5.7，1991年版的4.4.5和4.5)； ——增加了力學性能要求(見5.8)； ——修改了試驗方法。修改了鄰邊垂直度、分縫、外觀、表面涂層理化性能測定，增加了平整度、位差度、抽屜下垂度、擺動度、著地平穩性、抽屜深度與產品內部深度的偏差、其他要求、鋼板厚度、木質件甲醛釋放量和力學性能測定，刪除了平面度、平行度的檢驗、鍍層厚度的測定和剛度試驗(見6，1991年版的5)； ——修改了檢驗規則(見7，1991年版的6)； ——修改了標志、使用說明、包裝、運輸、貯存(見8，1991年版的7)。 本標準由中國輕工業聯合會提出。 本標準由全國家具標準化中心歸口。 本標準自實施之日起，代替原輕工業部發布的輕工行業標準QB／T 1097—1991《鋼制文件柜》。 鋼制文件柜 1 范圍 本標準規定了鋼制文件柜的術語和定義、產品分類、要求、試驗方法、檢驗規則、標志、使用說明、包裝、運輸、貯存。 本標準適用于鋼制文件柜。 2 規范性引用文件 下列文件對于本文件的應用是必不可少的。凡是注日期的引用文件，僅注日期的版本適用于本文件。凡是不注日期的引用文件，其最新版本(包括所有的修改單)適用于本文件。 GB／T 1720 漆膜附著力測定法 GB／T 1730 色漆和清漆 擺桿阻尼試驗 GB／T 1732 漆膜耐沖擊性測定法 GB／T 2828.1—2003 計數抽樣檢驗程序 第1部分：按接收質量限(AQL)檢索的逐批檢驗抽樣計劃 GB／T 3325—2008 金屬家具通用技術條件 GB 5296.6 消費品使用說明 第6部分：家具 GB／T 10357.4 家具力學性能試驗 柜類穩定性 GB／T 10357.5 家具力學性能試驗 柜類強度和耐久性 GB／T 13667.1—2003 鋼制書架通用技術條件 GB 18584 室內裝飾裝修材料 木家具中有害物質限量 GB 21556—2008 鎖具安全通用技術條件 QB／T 3826—1999 輕工產品金屬鍍層和化學處理層的耐腐蝕試驗方法 中性鹽霧試驗(NSS)法 3 術語和定義 GB／T 3325界定的以及下列術語和定義適用于本文件。 3.1 鋼制文件柜 steel fling cabinet 以薄鋼板為主要材料組成構架或構件，可以配以木材、人造板、塑料、玻璃等輔助材料制作的，用于存放文件、檔案、書刊、辦公用品或其他資料的柜。 4 產品分類 4.1 按產品成型方式分類 a) 焊接式：構架通過焊接成形，不可拆卸安裝； b) 組裝式：構架可以拆卸安裝。 4.2 按產品品種分類 a) 整體式：正常狀態下，不可分體使用； b) 多節式：正常狀態下，可以分體使用。