1 Scope
This standard describes a test method for the determination of the resistance to separation of the upper from the outsole or to separate adjacent layers of the outsole or to cause tear failure of the upper or the sole is measured. It also defines conditions of ageing that can be used for production control.
It applies to all types of footwear (cementing, vulcanization, injection molding, etc.) where the evaluation of sole adhesion on the upper is needed and where the upper is continuously assembled (closed shoe).
Notes:
1 In all cases the objective should be to test the bond strength nearest to the edge of the assembly
2 The test need not be carried out when the bond has been made by grindery (using, for example, nails or screws) or stitching.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding amending errors in the text), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of the normative document is applicable. For undated references, the latest edition of the normative document applies.
GB/T 16825.1-2002 Verification of Static Uniaxial Testing Machines - Part 1: Tension/Compression Testing Machines - Verification and Calibration of the Force-Measuring System (ISO 7500-1:1999, Metallic Materials - Verification of Static Uniaxial Testing Machines - Part 1: Tension/Compression Testing Machines, IDT)
ISO 18454 Footwear - Standard Atmospheres for Conditioning and Testing of Footwear and Components for Footwear
3 Term and Definition
Foreword I
1 Scope
2 Normative References
3 Term and Definition
4 Apparatus and Material
5 Sampling and Conditioning
6 Test Method
7 Expression of Results
8 Test Report
Appendix A (Normative) Ageing Process Conditions for the Upper-Sole Adhesion Test
Bibliography
