QC/T 1199-2023 Intergrated AC standard sockect-outlet of conductive charging for electric vehicles
1 Scope
This document specifies the technical requirements, test methods, safety requirements for marking, packaging, transportation and storage of integrated AC standard socket-outlet of conductive charging for electric vehicles.
This document is applicable to the fixed integrated AC power supply standard sockets of conductive charging for electric vehicles with rated voltage of 220V and rated current of 10A.
2 Normative references
The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 1002-2021 Single phase plugs and socket-outlets for household and similar purposes - Types, basic parameters and dimensions
GB/T 2099.1-2021 Plugs and socket-outlets for household and similar purposes - Part 1: General requirements
GB/T 2408-2008 Plastics - Determination of burning characteristics - Horizontal and vertical test
GB/T 2423.1-2008 Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
GB/T 2423.2-2008 Environmental testing for electric and electronic products - Part 2: Test methods - Test B: Dry heat
GB/T 2423.17 Environmental testing for electric and electronic products - Part 2: Test methods - Test Ka: Salt mist
GB/T 4208-2017 Degrees of protection provided by enclosure (IP code)
GB/T 7251.1-2013 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
GB/T 9254.1-2021 Information technology equipment, multimedia equipment and receivers - Electromagnetic compatibility - Part 1: Emission requirements
GB/T 16422.2-2022 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc sources
GB/T 16916.1-2014 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB) - Part 1: General rules
GB/T 16935.1 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
GB 18384-2020 Electric vehicles safety requirements
GB/T 18487.1-2023 Electric vehicle conductive charging system - Part 1: General requirements
GB/T 18487.2-2017 Electric vehicle conductive charging system - Part 2: EMC requirements for off-board electric vehicle supply equipment
GB/T 19596 Terminology of electric vehicles
GB/T 28569 Electric energy metering for electric vehicle AC charging spot
NB/T 33002-2018 Specification for electric vehicle AC charging spot
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 19596, GB 18384-2020 and the following apply.
3.1
integrated ac power supply standard socket
fixed device for charging and supplying power to electric vehicles when electric vehicles use the AC charging connection device specified in GB/T18487.1-2023, including single-phase bipolar grounding sockets, and other components for protection, fixing, guarding and other functions, such as box, column, residual current action circuit breaker, etc.
3.2
plug
a pin designed to fit into the socket sleeve of an outlet and equipped with electrical accessories for flexible cable electrical connection and mechanical positioning components
3.3
socket-outlet
a socket sleeve designed to fit into a plug and pin and equipped with electrical accessories for connecting the terminal of flexible cable
3.4
terminal
reusable, insulated or uninsulated connecting devices for electrical connection of external conductors
4 Technical requirements
4.1 Basic structure
The integrated ac power supply standard socket mainly includes single-phase bipolar grounding socket, box, column and residual current action circuit breaker (or the devices meet the residual current action circuit breaker function) and other components. The function block diagram of integrated ac power supply standard socket is shown in Figure 1.
4.2 Requirements for operating environment
4.2.1 Environmental temperature: -30℃ to +50℃.
4.2.2 Relative humidity: 5% to 95%.
4.3 Electrical parameters
4.3.1 Rated voltage: single phase, AC 220V.
4.3.2 Rated current:10A.
4.4 General requirements
4.4.1 The surface color of integrated ac power supply standard socket shall be uniform and smooth, without foaming, cracking, falling off and other phenomena, and the appearance shall be smooth, clean, without sharp angle, no scratch, no flash, no crack, no deformation and other defects.
4.4.2 The dimensions of the single-phase bipolar grounding socket in the integrated ac power supply standard socket shall meet the requirements of Figure 4 of GB/T 1002-2021.
4.4.3 The holding force of the single-phase bipolar grounding socket in the integrated ac power supply standard socket shall meet the requirements of Clause 22 of GB/T 2099.1-2021.
Contents
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Technical requirements
5 Test methods
6 Safety requirements for marking, packaging, transportation and storage
