標準編號:	QC/T 32-2006
中文名稱:	汽車用空氣濾清器試驗方法
英文名稱:	Test methods of air cleaners for automobiles
中標分類:	T13    進排氣與燃油供給系統
行業分類:	QC    汽車行業標準
ICS分類:	43.060.20 43.060.20    增壓沖氣、進氣/排氣管路系統 43.060.20
發布機構:	國家發改委
發布日期:	2006-12-17
實施日期:	2007-5-1
標準狀態:	superseded
被新標準替代:	QC/T 32-2017 汽車用空氣濾清器試驗方法
被替代日期:	2017-7-1
替代舊標準:	QC/T 32-1992 汽車用空氣濾清器性能試驗方法
翻譯語言:	英文
文件格式:	PDF
中文字符數:	32000 字
翻譯價格(元):	1600.0
交付時間:	付款后 1 個工作日

1 Scope This standard specifies the laboratory performance test methods of air cleaners for automobiles for the purpose of comparison of the laboratory performance test results. This standard is applicable to the performance test of air cleaner assembly (hereinafter referred to as assembly) and filter element for automobiles, and for reference by performance test of assembly and filter element for engineering machinery, agricultural and forestry machinery, ships and fixed power. 2 Normative References The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. GB 11122 Diesel Engine Oils 3 Terms, Definitions, Parameters, Symbols and Units 3.1 Terms and definitions For the purposes of this standard, the following terms and definitions apply. 3.1.1 air filter; air cleaner device which removes particles suspended in the air as it is drawn in the engine 3.1.2 oil-bath air cleaner air cleaner which can lead the dusty air to oil bath and make a part of dust adhere to engine oil under the action of inertial force, while the dusty air containing oil mist repasses the filter element and is further filtered, making the dust adhered to filter element return to the oil bath along with the engine oil 3.1.3 dry air cleaner

Foreword i 1 Scope 2 Normative References 3 Terms, Definitions, Parameters, Symbols and Units 4 Measurement Accuracy and Standard Conditions 5 Test Materials and Test Conditions 6 Test Equipment 7 Performance Test of Dry Air Cleaner Assembly 8 Air Flow Resistance Recovery Test of Dry Air Cleaner Assembly 9 Oil-bath Air Cleaner Assembly Test 10 Assembly Vibration Test Annex A (Normative) Calculation for the Rated Air Volume Flow of Air Cleaner Annex B (Normative) Test Dust Annex C (Normative) Test Device Annex D (Normative) Air Volume Flow and Air Flow Resistance Corrections to Standard Conditions Annex E (Normative) Test Report Sheet Annex F (Normative) Test Results