標準編號:	QC/T 710-2004
中文名稱:	汽車密封條壓縮負荷試驗方法
英文名稱:	Test method of compression load for automobile weather - Strips
中標分類:	J2
行業分類:	QC    汽車行業標準
ICS分類:	21.140 21.140    密封件、密封裝置 21.140
發布日期:	2004-10-20
實施日期:	2005-4-1
標準狀態:	valid
翻譯語言:	英文
文件格式:	PDF
中文字符數:	4000 字
翻譯價格(元):	240.0
交付時間:	付款后 1 個工作日

1 Scope This standard specifies the test method for compression load of automobile weather-strips. This standard is applicable to the test of compression load of automobile weather-strips. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. GB/T 2941 Rubber - Standard temperatures, humidities and times for the conditioning environmental and testing of test pieces (eqv ISO 471:1983) HG/T 2369 Specification for rubber and plastic tensile machine GB/T 8170 Rules for rounding off of numberical values 3 Definition 3.1 compression load force used for compressing a weather-strip of certain length to a certain height (or for a certain amount) at a specified speed 4 Instruments and apparatus 4.1 Tension tester The tension tester shall comply with the relevant requirements of HG/T 2369, with a measuring accuracy of Grade A. 4.2 Test device

Foreword i 1 Scope 2 Normative references 3 Definition 4 Instruments and apparatus 5 Test piece and conditioning 6 Test procedures 7 Representation of test result 8 Test report