Technical requirement of 900/1800MHz TDMA Digital Cellular Mobile Telecommunication Network General Packet Radio Service (GPRS)Equipment:Mobile Stations
Technical Requirement of 900/1800MHz TDMA Digital Cellular Mobile Telecommunication Network General Packet Radio Service (GPRS) Equipment: Mobile Stations
1 Scope
This standard specifies the requirements of mobile stations (MS) supporting General Packet Radio Service (GPRS) in 900/1800 MHz TDMA digital cellular mobile telecommunication network in terms of service, function, performance, interface, electromagnetic compatibility and environmental adaptability.
This standard is applicable to mobile stations (MS) supporting General Packet Radio Service (GPRS) and GSM mobile stations not supporting GPRS in 900/1800MHz TDMA digital cellular mobile telecommunication network; the technical requirements other than those related to General Packet Radio Service (GPRS) are applicable to GSM mobile stations that do not support GPRS.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions, of any of these publications do not apply to this standard. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 18287 General specification of lithium-ion battery for cellular phone
GB/T 18288 General specification of nickel-metal hydride battery for cellular phone
GB/T 18289 General specification of nickel-cadmium battery for cellular phone
YD 1268 The safety specification and test method for lithium batteries and charger
YD/T 965 Safety requirements and test method for user equipment
Technical requirements and testing methods for reliability of mobile telecommunication handset
Technical requirements and test methods for acoustics performance of digital mobile terminal
YD/T 910.21 900/1800MHz TDMA digital cellular mobile telecommunication network radio interface signalling part (Phase 2)
YD/T 910.22 900/1800MHz TDMA digital cellular mobile telecommunication network radio interface physical layer part (Phase 2)
YD 1032 Limits and measurement methods of electromagnetic compatibility for 900/1800 MHz TDMA digital cellular telecommunications system—Part 1: Mobile station and ancillary equipment
ITU-T Recommendations I.240—ISDN service capability—Definition of telecommunication service
3GPP TS 01.61 GPRS ciphering algorithm requirements
3GPP TS 02.60/3 GPP TS 22.060 General Packet Radio Service (GPRS); Service description; Stage 1
3GPP TS 03.03/3 GPP TS 23.003 Numbering, Addressing and Identification
3GPP TS 03.60/3 GPP TS 23.060 General Packet Radio Service (GPRS); Service description; Stage 2
3GPP TS 03.64/3 GPP TS 43.064 General Packet Radio Service (GPRS); Overall description of the GPRS radio interface; Stage 2
3GPP TS 04.04/3 GPP TS 44.004 Layer 1: General Requirements
3GPP TS 04.05/3 GPP TS 44.005 Data Link (DL) Layer: General Requirements
3GPP TS 04.06/3 GPP TS 44.006 Mobile Station - Base Stations System (MS - BSS) Interface Data Link (DL) Layer Specification
3GPP TS 04.07/3 GPP TS 24.007 Mobile radio interface signalling layer 3: General Aspects
3GPP TS 04.08/3 GPPTS 24.008 Mobile radio interface Layer 3 specification
3GPP TS 04.22 Radio Link Protocol (RLP) for data and telematic services on the Mobile Station - Base Station System (MS - BSS) interface and the Base Station System - Mobile-services Switching Centre (BSS - MSC) interface
3GPP TS 04.60/3 GPP TS 44.060 General Packet Radio Service (GPRS); Mobile Station (MS) - Base Station System (BSS) interface; Radio Link Control/ Medium Access Control (RLC/MAC) protocol
3GPP TS 04.64/3 GPPTS 44.064 General Packet Radio Service (GPRS); Mobile Station - Serving GPRS Support Node (MS-SGSN) Logical Link Control (LLC) layer specification
3GPP TS 04.65/3 GPPTS4.065 General Packet Radio Service (GPRS); Mobile Station (MS) - Serving GPRS Support Node (SGSN); Subnetwork Dependent Convergence Protocol (SNDCP)
3GPP TS 05.01/3 GPPTS 45.001 Physical layer on the radio path; General description
3GPP TS 05.02/3 GPP TS 45.002 Multiplexing and Multiple Access on the Radio Path
3GPP TS 05.03/3 GPP TS 45.003 Channel coding
3GPP TS 05.04/3 GPP TS 45.004 Modulation
3GPP TS 05.05/3 GPP TS 45.005 Radio Transmission and Reception
3GPP TS 05.08/3 GPP TS 45.008 Radio subsystem link control
3GPP TS 05.10/3 GPP TS 45.010 Radio subsystem synchronization
3GPP TS 07.60 General Packet Radio Service (GPRS); Mobile Station (MS) supporting GPRS
3GPP TS 24.022 Radio Link Protocol (RLP) for circuit switched bearer and teleservices
3GPP TS 27.060 Packet domain; Mobile Station (MS) supporting Packet Switched services
3GPP TS 11.11 Specification of the Subscriber Identity Module - Mobile Equipment (SIM-ME) Interface
3GPP TS 11.12 Specification of the 3 Volt Subscriber Identity Module - Mobile Equipment (SIM - ME) Interface
3GPP TS 11.18 Specification of the 1.8 Volt Subscriber Identity Module - Mobile Equipment (SIM - ME) Interface
3GPP TS 51.010-1 Mobile Station (MS) conformance specification; Part 1: Conformance specification
3 Abbreviations
For the purposes of this standard, the following abbreviations apply.
4 General
The logical structure of GPRS network is shown in Figure 1. GPRS system consists of switching subsystem, Base Station Subsystem (BSS) and Mobile Station (MS). GPRS switching subsystem consists of Serving GPRS Support Node (SGSN), Gateway GPRS Support Node (GGSN), Border Gateway (BG), Charging Gateway (CG), MSC/VLR and HLR with GPRS function, etc.
GPRS MS can be grouped into three classes according to its ability to support GPRS service and GSM circuit switched service simultaneously.
Class A: it supports simultaneous attachment, activation, monitoring, invocation and telecommunication services of GPRS service and GSM circuit switched service. Mobile subscribers can simultaneously initiate/receive calls of packet and circuit services according to quality of service (QoS) requirements.
Class B: it supports simultaneous attachment, activation and monitoring of GPRS service and GSM circuit-switched service. However only limited simultaneous calls are supported: GPRS virtual circuit (GPRS activation) is not cleared when calling circuit-switched service and circuit-switched telecommunication, and GPRS virtual circuit is set to "busy or hold" at this time, which does not support simultaneous telecommunication service. Mobile subscribers can initiate/receive calls for packet and circuit services in turn, but not simultaneously. The mobile station automatically selects the appropriate service.
Class C: it only supports the non simultaneous attachment of GPRS service and GSM circuit-switched service. If MS supports GPRS service and GSM circuit-switched service, MS in Class C may select (manually or according to default settings) to initiate/receive GPRS service or GSM circuit-switched service, and the unselected service state is deactivated, i.e., unreachable to subscribers.
Foreword i
1 Scope
2 Normative references
3 Abbreviations
4 General
5 Service and functional requirements
5.1 General
5.2 GSM circuit-switched service requirements
5.3 GSM functional requirements
5.4 GPRS MS service requirements
5.5 GPRS MS functional requirements
6 Performance requirements
6.1 Band and channel allocation
6.2 RF performance
6.3 Acoustics performance
7 Interface requirements
7.1 Um interface
7.2 SIM/ME interface
8 Requirements of electromagnetic compatibility (EMC)
9 Requirements of environmental adaptability
10 Requirements of battery and charger
10.1 Battery performance
10.2 The safety of charger
11 Appearance, packaging and assembly
Annex A (Normative) Main data stored in GPRS mobile phone
Annex B (Normative) Main functional requirements of mobile station
900/1800MHzTDMA數字蜂窩移動通信網
通用分組無線業務(GPRS) 設備技術要求: 移動臺
1 范 圍
本標準規定了900/1800MHz TDMA數字蜂窩移動通信網支持通用分組無線業務(GPRS) 的移動臺
(MS) 在業務、功能、性能、接口、電磁兼容和環境適應性等方面的要求.
本標準適用于900/1800MHz TDMA數字蜂窩移動通信網支持通用分組無線業務(GPRS) 的移動臺
(MS) 以及不支持GPRS的GSM移動臺;其中除通用分組無線業務(GPRS) 相關的要求外的其他技術要 求適用于不支持GPRS的GSM移動臺。
2規范性引用文件
下列文件中的條款通過本標準的引用而成為本標準的條款.凡是注日期的引用文件,其隨后所有的 修改單(不包括勘誤的內容) 或修訂版均不適用于本標準,然而,鼓勵根據本標準達成協議的各方研究
是否可使用這些文件的最新版本.凡是不注日期的引用文件,其最新版本適用于本標準.
GB/T 18287
GB/T 18288
GB/T 18289
YD 1268
YDT965
YD/T910.21
YDT910.22
YD 1032
ITU-T
3GPP TS 01.61
蜂窩電話用鋰離子電池總規范
蜂窩電話用金屬氫化物鎳電池總規范
蜂窩電話用金屬鎘鎳電池總規范
移動通信手持機鋰電池及充電器的安全要求和試驗方法
電信終端設備的安全要求和試驗方法
移動通信手持機可靠性技術要求與測試方法
移動數字終端音頻性能技術要求及測試方法
90/1800MHz TDMA 數字蜂窩移動通信網無線接口第二階段信令部分 900/1800MHz TDMA 數字蜂窩移動通信網無線接口第二階段物理層部分 901800MHz TDMA 數字蜂窩移動通信系統電磁兼容性限值和測量方法
第一部分: 移動臺及其輔助設備
建議I240 ISDN業務能力電信業務的定義
GPRS加密算法要求
3GPP TS 02.60/3 GPP TS 22.060 GPRS業務描述: 第一階段
3GPP TS 03.03/3 GPP TS 23.003 編號、地址和標識
3GPP TS 03.60/3 GPPTS 23.060 GPRS業務描述: 第二階段
3GPP TS 03.64/3 GPP TS 43.064 GPRS無線接口總體描述: 第二階段
3GPP TS 04.04/3 GPP TS 44.004 層一: 一般要求
3GPPTS 04.05/3 GPPTS44.005數據鏈路(DL) 層: 一般要求
3GPP TS 04.06/3 GPPTS44.06 移動臺-基站系統接口數據鏈路(DL) 層規范 3GPP TS04.073 GPPTS24.007 移動無線接口層三信令: 概述
YD/T 1214-2006
3GPPTS 04.08/3 GPPTS 24.008 移動無線接口層三規范
3GPPTS 04.22 移動臺-基站子系統 (MS-BSS) 接口及基站子系統-移動業務交換中心 (BSS-MSC) 接口數據和電信業務的無線鏈路協議(RLP)
3GPP TS 04.60/3 GPP TS44.060移動臺-基站子系統(MS-BSS) 接口;無線鏈路控制媒體接人
控制 (RLC/MAC) 協議
3GPP TS 04.64/3 GPPTS 44.064 移動臺-服務GPRS支持節點(MS-SGSN) 接口;邏輯鏈路控制層 3GPPTS 04.65/3 GPPTS4.065 移動臺-服務GPRS支持節點(MS-SGSN) 接口;子網相關集中協議 3GPPTS 05.01/3 GPPTS 45.001 無線路徑物理層: 概述
3GPP TS 05.02/3 GPP TS 45.002 無線路徑的復用和多址接人
3GPP TS 05.03/3 GPP TS 45.003 信道編碼
3GPP TS 05.04/3 GPP TS 45.004 調制
3GPP TS 05.05/3 GPP TS 45.005 無線傳輸和接收
3GPPTS 05.08/3 GPP TS 45.008 無線子系統鏈路控制
3GPP TS 05.10/3 GPP TS 45.010 無線子系統同步
3GPP TS 07.60
3GPPTS 24.022
3GPP TS 27.060
3GPP TS 11.11
3GPPTS 11.12
3GPP TS 11.18
3GPPTS 51.010-1
支持GPRS 的MS
電路交換承載業務和電信業務的無線鏈路協議(RLP)
分組域;MS支持的分組交換業務
用戶識別模塊-——移動設備(SIM-ME) 接口規范 (5V)
用戶識別模塊- —移動設備 (SIM-ME) 接口規范 (3V)
用戶識別模塊--移動設備 (SIM-ME) 接口規范(1.8V)
數字蜂窩無線電通信系統(第2+階段) 移動臺 (MS)一致性要求:
部分1一致性要求
3 縮 略 語
下列縮略語適用于本標準。
ARFCN
APN
BSS
Cs
DCE
DTE
GGSN
Absolute Radio Frequency Channel Number Access Point Name
Base Station Subsystem
Coding scheme
Data Circuit terminating Equipment
Data Terminal Equipment
Gateway GPRS Support Node
絕對射頻頻道號
接入點名
基站子系統
編碼方式
數字電路終端設備
數字終端設備
GPRS網關節點
GMM/SM GPRS GSM GSN HLR
IMEI
GPRS Mobiliy Management and Session General Packet Radio Service
Global System Mobile
GPRS Support Node
Home Location Register
International Mobile Equipment Identity
Management GPRS移動性管理和會話管理
通用分組無線業務
全球移動通信系統
GPRS支持節點
歸屬位置寄存器
國際移動設備識別
2
YD/T 1214-2006
IMSI
P
LLC
MAC
MM
MO
MS
MSC
MT
NSAPI
PDP
PDTCH
PDU
PLMiN
PPP
P-TMSI
PTP
PTP-CLNS PTP-CONS
QoS
RLC
RX
SGSN
SIM
SM
SMS
SNDC
SNDCP
SN-PDU
TLI
Um 接口
VLR
Intemational Mobile Subscriber Identity
Internet Protoco]
Logical Link Control
Medium Access Control
Mobility Management
Mobile Originated
Mobile Station
Mobile Switching Center
Mobile Terminated
Network layer Service Access Point Identifier
Packet Data Protocol
Packet Date Traffic Channel
Packet Data Unit
Public land mobile network
Point to Point Protocol
Packet-TMSI
Point To Point
Point To Point-Connectionless Network service Point To Point-Connection Network service Quality of Service
Radio Link Control
Receive
Serving GPRS Support Node
Subscriber Identity Module
Short Message
Short message Service
SubNetwork Dependent Convergence SubNetwork Dependent Convergence Protocol
SNDCP PDU
Temporary Logical link Identity
Um Interface
Visitor Location Register
國際移動用戶識別
因特網協議
邏輯鏈路控制
媒體接人控制
移動性管理
移動臺發起
移動臺
移動業務交換中心
移動臺終止
網絡層業務接入點標識符 分組數據協議
分組數據傳輸信道
分組數據單元
公用陸地移動網
點到點協議
分組移動臺臨時識別號
點對點業務
點對點無連接網絡業務 點對點面向連接網絡業務 業務質量
無線鏈路控制
接收
GPRS服務節點
用戶識別模塊
短消息
短消息業務
子網相關匯聚
子網相關匯聚協議
子網相關匯聚協議分組數據單元 臨時邏輯鏈路標識
基站子系統和移動臺間接口 訪問位置寄存器
4 概 述
GPRS網絡邏輯結構示意如圖1所示.GPRS系統由交換子系統、基站子系統(BSS) 和移動臺 (MS) 組成.GPRS交換子系統由GPRS服務節點(SGSN) 、GPRS網關節點(GGSN) 、邊界網關 (BG) 、計
費網關 (CG) 以及具有GPRS功能的MSC/VLR、HLR等組成.
GPRS MS根據其同時支持GPRS業務和GSM電路交換業務的能力可劃分為三類。
YD/T 1214-2006
A類: 支持GPRS業務和GSM電路交換業務的同時附著、同時激活、同時監測、同時調用和同時的通
信業務.移動用戶可以根據服務質量(QoS) 要求同時發起/接受分組和電路業務的呼叫.
B類: 支持GPRS業務和GSM電路交換業務的同時附著、同時激活、同時監測。僅支持有限的同時調
用: 在調用電路交換業務和進行電路交換通信時GPRS虛電路(GPRS激活) 不被清除,此時GPRS虛電路 設置為"忙或保持"，不支持同時的通信業務。移動用戶可以依次發起/接收分組和電路業務的呼叫但不 能同時進行。移動臺自動選擇適當的業務。
C類: 僅支持GPRS業務和GSM電路交換業務的非同時附著。如果MS支持GPRS業務和GSM電路交換 業務,則C類MS可人工選擇或根據缺省設置選擇發起/接受GPRS業務或GSM電路交換業務,沒有被選擇 的業務狀態為去活,即用戶不可及.
信令和數據傳輸接口
圖1 GPRS 網絡邏輯結構示意
5業務與功能要求
5.1概述
本章所涉及的各類GSM電路交換業務為MS使用GSM網絡進行接人時需要支持的業務。不同類型的 MS根據其應用場合和應用需求支持下面所述各類型業務中的一種或多種具體業務,但應至少支持電信業 務或承載業務中的一種具體業務.對于手持式移動臺,應至少支持電話業務、緊急呼叫和基于電路域傳 送的點對點短消息業務這三種電信業務及其對應的承載業務;對于車載式移動臺,應至少支持電話業務, 緊急呼叫這兩種電信業務及其對應的承載業務。
本章所涉及的各類GPRS分組交換業務為MS使用GPRS網絡進行接入時需要支持的業務。不同類型的 MS根據其應用場合和應用需求至少支持一種具體業務及其對應的承載業務。
如果移動臺支持附錄B中未涉及的其他功能,則該功能應正常.
5.2 GSM電路交換業務要求
5.2.1電信業務
4
YD/T 1214-2006
MS可提供的電信業務有以下幾類,見表1.
表1 GSM電信業務
