Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is one of the series standards for user equipment of TD-LTE digital cellular mobile telecommunication network (Phase 1). Names and structures of this series of standards are as follows:
a) YD/T 2575 Technical Requirements for User Equipment of TD-LTE Digital Cellular Mobile Telecommunications Network (Phase 1);
b) Test Method for User Equipment of TD-LTE Digital Cellular Mobile Telecommunication Network (Phase 1)
——Part 1: Basic Functions, Services and Reliability Test;
——Part 2: Radio Transmission and Reception Performance Test;
——Part 3: Radio Resource Management Performance Test;
——Part 4: Protocol Conformance Test;
——Part 5: Network Compatibility Test.
With the development of technology, subsequent relevant standards will be developed.
This standard is developed in accordance with the rules given in GB/T 1.1-2009.
This standard replaces YD/T 2575-2013 Technical Requirements for User Equipment of TD-LTE Digital Cellular Mobile Telecommunications Network (Phase 1). The following main changes have been made with respect to the YD/T 2575-2013:
——The mutual identification requirements for MFBI band have been added (see 7.4.1.14);
——The frequency range of band 41 has been added (see 8.1.5);
——The requirements for limits of spurious emission band 41 co-existence have been added (see 8.2.5.4.3);
——The reference sensitivity requirements for band 41 have been added (see 8.3.3);
——The reference sensitivity uplink configuration for band 41 has been added (see 8.3.3);
——The in-band blocking requirements of band 41 have been added. The interference of example 3 of in-band blocking in other frequency bands has been changed from -30 to -38, and the requirement for example 4 has been deleted (see 8.3.6.2);
——The out-of-band blocking requirements for band 41 have been added (see 8.3.6.3);
——The threshold requirements for detectable RSRP ês/Iot, SCH_RP and SCH ês/Iot in band 41 cell have been added (see 8.6.1.2.3, 8.6.1.2.4, 8.6.5.3.2, 8.6.5.3.3, 8.6.5.3.4, 8.6.5.4.2 and 8.6.5.4.3);
——The absolute accuracy requirements for RSRP intra-frequency measurement of band 41 have been added (see 8.6.6.1.1.1);
——The relative accuracy requirements for RSRP intra-frequency measurement of band 41 have been added (see 8.6. 6.1.1.2);
——The absolute accuracy requirements for RSRP inter-frequency measurement of band 41 have been added (see 8.6. 6.1.2.1);
——The relative accuracy requirements for RSRP inter-frequency measurement of band 41 have been added (see 8.6.6.1.2.2);
——The absolute accuracy requirements for RSRQ intra-frequency measurement of band 41 have been added (see 8.6.6.2.1.1);
——The relative accuracy requirements for RSRQ intra-frequency measurement of band 41 have been added (see 8.6.6.2.1.2);
——The absolute accuracy requirements for RSRQ inter-frequency measurement of band 41 have been added (see 8.6.6.2.2.1);
——The relative accuracy requirements for RSRQ inter-frequency measurement of band 41 have been added (see 8.6.6.2.2.2);
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. The issuing body of this document shall not be held responsible for identifying any or all such patent rights.
This standard was proposed by and is under the jurisdiction of China Communications Standards Association.
Drafting organizations of this standard: China Academy of Information and Communications Technology, China Mobile Communications Corporation, State Radio Monitoring Center, Datang Telecom Technology & Industry Group, Huawei Technologies Co., Ltd., ZTE Corporation, Beijing Zhanxun High-Tech Communication Technology Co., Ltd., Nokia Communication Co., Ltd., Tianjin Samsung Telecom Technology Co., Ltd., MediaTek (Beijing) Inc. and Beijing StarPoint Communication Software Co., Ltd.
Chief drafters of this standard: Duo Hao, Liu Zhen, Yang Peng, Guo Gan, Li Bo, Jin Chenguang, Xu Qiaochun, Zhao Rong, Liu Haitao, Wang Yuxia, Shi Yanshan, Li Fang, Zhou Juejia, Wu Yue, Fu Yikang, Zhao Can.
This standard was first issued in July 2013, and is revised for the first time.
Technical Requirements for User Equipment of TD-LTE Digital Cellular Mobile Telecommunication Network (Phase 1)
1 Scope
This standard specifies the requirements for function and performance, power consumption, interface, reliability, electromagnetic compatibility, specific absorption rate, battery and charger, etc. of user equipment (UE) of TD-LTE digital cellular mobile telecommunication network in data services.
This standard is applicable to all user equipment of TD-LTE digital cellular mobile telecommunication network in Phase 1.
2 Normative References
The following referenced documents are indispensable for the application of this standard. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies.
GB 2312-1980 Code of Chinese Graphic Character Set for Information Interchange — Primary Set
GB 4943.1 Information Technology Equipment — Safety — Part 1: General Requirements
GB/T 18287 General Specification of Lithium-Ion Cells and Batteries for Mobile Phone
GB/T 18288 General Specification of Nickel-Metal Hydride Battery for Cellular Phone
GB/T 18289 General Specification of Nickel-Cadmium Battery for Cellular Phone
YD 1268.1 The Safety Specification and Test Method for Lithium Batteries
YD 1268.2 The Safety Specification and Test Method for Lithium Chargers
YD/T 1539 Technical Requirements and Testing Methods for Reliability of Mobile Telecommunication Handset
YD/T 1591 Technical Requirements and Test Method for Power Adapter and Charging/Data Port of Mobile Telecommunication Terminal Equipment
YD/T 2558-2013 Technical Requirement for Safety of LTE Terminal and Network Equipment Based on ZUC
YD/T 2560-2013 TD-LTE Digital Cellular Mobile Communication Network — Uu Interface Physical Layer Technical Requirement (Phase 1) (All Parts)
YD/T 2561-2013 TD-LTE Digital Cellular Mobile Telecommunication Network Technical Requirement for Uu Interface Layer Two (Phase 1)
YD/T 2562-2013 TD-LTE Digital Cellular Mobile Telecommunication Network Technical Requirement for Uu Interface Layer Three (Phase 1) (All Parts)
YD/T 2581-2013 LTE Digital Cellular Mobile Telecommunication Network Technical Requirements for UICC-ME(Cu)Interface (All Parts)
YD/T 2583.14 Requirements and Measurement Methods of Electromagnetic Compatibility for Cellular Mobile Telecommunications Equipment — Part 14: LTE User Equipment and Ancillary Equipment
3GPP TS 24.301 Non-Access-Stratum (NAS) Protocol for Evolved Packet System (EPS); Stage 3
3GPP TS 36.101 Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE) Radio Transmission and Reception
3GPP TS 36.201 Evolved Universal Terrestrial Radio Access (E-UTRA); LTE Physical Layer; General Description
3GPP TS 36.211 Evolved Universal Terrestrial Radio Access (E-UTRA); Physical Channels and Modulation
3GPP TS 36.212 Evolved Universal Terrestrial Radio Access (E-UTRA); Multiplexing and Channel Coding
3GPP TS 36.213 Evolved Universal Terrestrial Radio Access (E-UTRA); Physical Layer Procedures
3GPP TS 36.214 Evolved Universal Terrestrial Radio Access (E-UTRA); Physical Layer; Measurements
3GPP TS 36.300 Evolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Universal Terrestrial Radio Access Network (E-UTRAN); Overall Description; Stage 2
3GPP TS 36.302 Evolved Universal Terrestrial Radio Access (E-UTRA); Services Provided by the Physical Layer
3GPP TS 36.304 Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE) Procedures in Idle Mode
3GPP TS 36.306 Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE) Radio Access Capabilities
3GPP TS 36.321 Evolved Universal Terrestrial Radio Access (E-UTRA); Medium Access Control (MAC) Protocol Specification
3GPP TS 36.322 Evolved Universal Terrestrial Radio Access (E-UTRA); Radio Link Control (RLC) Protocol Specification
3GPP TS 36.323 Evolved Universal Terrestrial Radio Access (E-UTRA); Packet Data Convergence Protocol (PDCP) Specification
3GPP TS 36.331 Evolved Universal Terrestrial Radio Access (E-UTRA); Radio Resource Control (RRC); Protocol Specification
3 Terms, Definitions and Abbreviations
3.1 Terms and Definitions
For the purposes of this standard, the following term and definition apply.
3.1.1
Terminal Equipment
whole equipment interacting with the radio access subsystem, which is identical to UE, unless otherwise stated
3.2 Abbreviations
For the purposes of this standard, the following abbreviations apply.
ACK Acknowledgment
ACLR Adjacent Channel Leakage Ratio
ACS Adjacent Channel Selectivity
AM Acknowledged Mode
A-MPR Additional Max Power Reduction
ANR Automatic Neighbor Relation
ARQ Automatic Repeat-Request
AWGN Additive White Gaussian Noise
BCCH Broadcast Control Channel
BCH Broadcast Channel
BLER Block Error Rate
BPSK Binary Phase Shift Keying
BSR Buffer Status Report
BW Band Width
C_RNTI Cell Radio Network Temporary Identifier
CCCH Common Control Channel
CCE Control Channel Element
CDD Cycle Time Delay Diversity
CGI Cell Group Identity
CM Connection Management
CP Cyclic Prefix
CQI Channel Quality Indicator
CSG Closed Subscriber Group
CSI Channel State Information
CW Continuous Wave
DCCH Dedicated Control Channel
DCI Downlink Control Information
DL-SCH Downlink Shared Channel
DRB Data Radio Bearer
DRS Dedicated Reference Signal
DRX Discontinuous Reception
DTCH Dedicated Traffic Channel
DTX Discontinuous Transmit
DwPTS Downlink Pilot Timeslot
EARFCN E-UTRA Absolute Radio Frequency Channel Number
EMM EPS Mobility Management
EPS Evolved Packet System
ESM EPS Session Management
ETWS Earthquake And Tsunami Warning System
E-UTRA EvolvedUTRA
E-UTRAN EvolvedUTRAN
EVM Error Vector Magnitude
FSTD Frequency Switch Transmit Diversity
GUTI Globally Unique Temporary UE Identity
HARQ Hybrid Automatic Repeat Request
ID Identity
IDFT Inverse Discrete Fourier Transform
IMEI International Mobile Equipment Identity
IMSI International Mobile Subscriber Identification Number
IP Internet Protocol
MAC Medium Access Control
MBW Measurement Band Width
MCS Modulation and Coding Scheme
ME Mobile Equipment
MIB Master Information Block
MIMO Multi-input Multi-output
MPR Max Power Reduction
MT Mobile Terminal
NACK Negative Acknowledgement
NAS Non Access Stratum
OCNG OFDMA Channel Noise Generator
OFDMA Orthogonal Frequency Division Multiplexing Access
PA Power Amplifier
PBCH Physical Broadcast Channel
PCCH Paging Control Channel
PCFICH Physical Control Format Indicator Channel
PCH Paging Channel
PDA Personal Digital Assistant
PDCCH Physical Downlink Control Channel
PDCP Packet Data Convergence Protocol
PDN Public Data Network
PDSCH Physical Downlink Shared Channel
PDU Protocol Data Unit
PHICH Physical HARQ Indicator Channel
PHR Power Headroom Report
PLMN Public Land Mobile Network
PMI Precoding Matrix Indicator
PPM Part per Million
PRACH Physical Random Access Channel
PRB Physical Resource Block
PSS Primary Synchronization Signal
PUCCH Physical Uplink Control Channel
PUSCH Physical Uplink Shared Channel
QAM Quadrature Amplitude Modulation
QPSK Quadrature Phase Shift Keying
RACH Random Access Channel
RAT Radio Access Technology
RB Resource Block
RE Resource Element
RF Radio Frequency
RI Rank Indicator
RLC Radio Link Control
ROHC Robust Header Compression
RRC Radio Resource Control
RS Reference Signal
RSRP Reference Signal Receiving Power
RSRQ Reference Signal Receiving Quality
SC-FDMA Single Carrier Frequency Division Multiple Access
SDU Service Data Unit
SF Subframe
SFBC Space Frequency Block Code
SIB System Information Block
SM Session Management
SMS Short Messaging Service
SN Sequence Number
SNR Signal to Noise Ratio
SRB Signalling Radio Bearer
SRS Sounding Reference Signal
SSS Secondary Synchronization Signal
TA Timing Advance
TB Transport Block
TBS Transport Block Size
TDD Time Division Duplexing
TE Terminal Equipment
TM Transparent Mode
TMSI Temporary Mobile Subscriber Identity
TPC Transmit Power Control
TTI Transmission Time Interval
Tx Transmit
UCI Uplink Control Information
UE User Equipment
UL Uplink
UL-SCH Uplink Shared Channel
UM Unacknowledged Mode
UpPTS Uplink Pilot Timeslot
USB Universal Serial BUS
USIM Universal Subscriber Identity Module
UTRA Universal Telecommunication Radio Access
4 Overview
Figure 1 Logical Structure Diagram of TD-LTE Terminal Equipment
TD-LTE terminal equipment, also known as user equipment (UE), may be classified into various types based on their purposes and functions. The terminal shall provide corresponding compatibility interfaces according to the different connected equipment, such as the air interface and USB interface between the TD-LTE terminal and the TD-LTE network equipment. Terminal equipment shall include ME capable of sending and receiving wireless signals, baseband processing and running high-level applications, and a detachable smart card USIM capable of saving data, programs and secure identification. ME and USIM shall be connected by standard Cu interface. ME can be further divided into smaller unit equipment logically, i.e. the MT responsible for wireless reception and transmission and related functions and the TE responsible for running end-to-end high-level applications. The MT and the TE can be connected through various physical means (wired or wireless).
In the TD-LTE logical structure diagram shown in Figure 2, the TE is connected to the base station equipment system through the TD-LTE air interface (Uu interface), and communicates with the core network (CN) through the base station equipment system, thereby completing the entire end-to-end service connection.
核心網 Core network
Figure 2 The Position of the UE in the Logical Structure of the TD-LTE System
LTE Phase 1 terminals may follow 3GPP R8 or R9 versions in terms of the version of air interface protocol stack. The R8 version terminal mentioned in the subsequent text refers to the LTE terminal that follows the 3GPP R8 version protocol stack; the R9 version terminal refers to the LTE terminal that follows the 3GPP R9 version protocol stack.
5 UE Classification and Power Class
5.1 Classification of UE
According to the size and application range of terminals, UE can be roughly classified as follows:
——Handheld station: equipment of small size and suitable for hand-held, capable of independently supporting TD-LTE packet domain bearer services;
——Data card: equipment that cannot be used independently and needs to be connected to other equipment such as laptops or PDAs to support TD-LTE packet domain bearer services;
——Other UE: equipment not included in the above types that can be used independently or in combination with other equipment and support TD-LTE packet domain bearer services.
5.2 Power Class of UE
The power class of the UE is defined in terms of maximum power output. There is only one class for UE based on the power class, as shown in Table 1.
Table 1 Power Class of UE
Power class Max. output power Tolerance
3 +23 dBm +2 dB/-2 dB
5.3 UE Transmission Capability Level
According to the uplink and downlink transmission capability of the UE, the UE can be divided into five transmission capability levels as listed in Table 2 and Table 3.
Table 2 Description of UE Downlink Service Capability Level
UE level The number of DL-SCH transport block bits that can be received per TTI The bit number of each DL-SCH transport block that can be received per TTI The number of bits of the soft channel The maximum number of layers supported by downlink space-time multiplexing
Level 1 10296 10296 250368 1
Level 2 51024 51024 1237248 2
Level 3 102048 75376 1237248 2
Level 4 150752 75376 1827072 2
Level 5 299552 149776 3667200 4
Table 3 Description of UE Uplink Service Capability Level
UE grade The number of UL-SCH transport block bits that can be sent per TTI Whether the uplink supports 64QAM
Level 1 5160 No
Level 2 25456 No
Level 3 51024 No
Level 4 51024 No
Level 5 75376 Yes
6 Bearer Service
UE shall support packet domain bearer services.
——Downlink packet data services: UEs supporting packet data services shall support packet data transmission at the downlink peak bearer rate that matches the capability level;
——Uplink packet data services: UEs supporting packet data services shall support packet data transmission at the uplink peak bearer rate that matches the capability level.
——Combination of multiple bearer services: UEs shall support establishing combination of at least 2 packet domain service bearers.
7 Functions of UE
7.1 Basic Functions of UE Human-Machine Interface
7.1.1 Overview of human-machine interface functions
See Table 4 for the basic functional requirements of various types of UE human-machine interface.
Table 4 Basic Functions of UE Human-Machine Interface
Name Requirements
Data connection progress indicator Mandatory support
PLMN indication Mandatory support for handheld station and data card (computer client);
Support is required for other types with a visual human-machine interface, and optional for types without visual human-machine interface.
PLMN selection Mandatory support for handheld station and data card (computer client);
Optional support for other types of UE according to application requirements
Keyboard Mandatory support for handheld station; optional support for other types of UE according to application requirements
IMEI Mandatory support
Service indicator Mandatory support for handheld station and data card (computer client);
Support is required for other types of UE with a visual human-machine interface, and optional for types without visual human-machine interface.
Engagement identification management
(card identification management) Mandatory support; optional if without a human-machine interface
Switch Mandatory support for handheld stations and other types of UE with independent power supply;
Optional support for data card
RAT Mode Indication Mandatory support for handheld station; optional support for other types of UE according to application requirements
Input method Mandatory support for UE with human-machine interface and input function.
Battery capacity indication and warning Mandatory support for handheld and other UEs with human-machine interface and rechargeable battery;
Optional support for other types of UE according to application requirements
Charging capability Mandatory support for handheld and other UEs with human-machine interface and rechargeable battery;
Optional support for other types of UE according to application requirements
Chinese support capability Mandatory support for handheld station and data card (computer client);
Optional support for other types of UE according to application requirements
Other functions of UE Mandatory support
7.1.2 Data connection progress indicator
This function shall be able to give an indication based on the signaling information returned by the network, such as voice prompt or visual symbol or graphic display. The user may learn about the state of current connection according to various indications to confirm whether the connection establishment is successful.
7.1.3 PLMN indication
This function shall display the PLMN number or operator identifier corresponding to PLMN number of the currently registered network of the UE, so the user can confirm whether UE is online or roaming.
7.1.4 PLMN selection
When there is more than one PLMN available, the user can use this function to select one of the PLMNs or set the PLMN selection modes.
7.1.5 Keyboard
The keyboard may be a physical keyboard, or other alternative input methods. No matter what input method is adopted, it should be able to meet the input requirements of the UE.
7.1.6 IMEI
UE shall have a globally unique IMEI. For the handheld stations with keyboard input method, type “*#06#” to display IMEI on the human-machine interface. For other types of UEs, IMEI shall be inquired.
7.1.7 Service indicators
Business indicators shall be able to verify whether the current signal strength of the user is sufficient for normal communication on human-machine interface according to the network signal condition. Where the signal is poor or the user service is limited, UE shall indicate to the user that the communication is limited; where the signal is good and the user service is not limited, the user shall be prompted of successfully logging in the selected PLMN, and the network signal strength shall be able to guarantee normal communication. In this case, this function can be combined with PLMN indicator.
The business indicator can display the current service status in real time, and provide related information such as data connection status and data connection time (optional support).
7.1.8 Engagement identification management (card identification management)
For a UE that supports hot plugging and unplugging of the USIM, if the USIM is removed from the UE when the UE is powered on, the UE shall perform IMSI detach, the ongoing service shall be interrupted, and the UE cannot perform other communications except emergency calls. At the same time, there shall be an indication of "insert or detect USIM" on the UE human-machine interface.
7.1.9 Switch
The UE shall be provided with a power-on/off switch. Before power-off, the UE shall firstly complete the following work: end the current service and complete the corresponding resource release.
7.1.10 RAT mode indication
UE shall be able to correctly display the current radio access technology.
7.1.11 Input method
The UE shall correctly provide Simplified Chinese (alphabet-based input method), English and numeric input methods that functions properly, and shall accommodate for other input methods it supports.
7.1.12 Battery capacity indication and warning
UE shall have battery capacity indication, charging state indication and insufficient capacity warning indication; the indication shall change in the same trend as the electricity in battery changes.
7.1.13 Charging capability
UE shall charge properly. When the battery is fully charged, the UE under test shall indicate that the battery is full and automatically stops charging.
7.1.14 Chinese support capability
UE shall support Simplified Chinese interface as specified in GB 2312-1980 and shall be configured with a Simplified Chinese menu.
7.1.15 Other functions of UE
Other functions of the UE shall be correctly realized according to the instructions.
7.2 Functional Requirements on Physical Layer
7.2.1 OFDMA/SC-FDMA parameters
The UE shall support downlink OFDMA and uplink SC-FDMA transmission, and the subcarrier spacing shall support 15 kHz, optionally 7.5 kHz.
The UE shall support normal CP (Normal CP, 4.687 μs) and support for extended CP (Extended CP, 16.67 μs) is optional.
7.2.2 Frame structure
The UE shall support the frame structure of uplink and downlink timeslot ratios of configurations 0, 1, 2, 3, 4, 5 and 6.
The UE shall support the special timeslot ratios of configurations 0, 1, 2, 3, 4, 5, 6, 7 and 8.
7.2.3 Physical channel
The UE supports all physical channels as follows:
——PUSCH, PUCCH, PRACH;
——PDSCH, PHICH, PCFICH, PDCCH;
——PBCH.
It is required to support receiving the control channel and data channel transmitted on DwPTS with special timeslot, and sending sounding and short RACH (PRACH preamble format 4) transmitted on UpPTS with special timeslot.
7.2.4 Multi-antenna technology
7.2.4.1 MIMO transmission technology
The UE shall support the following downlink MIMO transmissions:
——Single-antenna port (antenna port 0) transmission;
——Single-antenna port (antenna port 5) transmission;
——2-antenna port open-loop transmit diversity;
——2-antenna port closed-loop spatial multiplexing;
——2-antenna port spatial multiplexing (large delay CDD);
——4-antenna port open-loop transmit diversity;
——4-antenna port closed-loop spatial multiplexing;
——4-antenna port spatial multiplexing (large delay CDD).
Support for the following downlink MIMO transmission technologies is optional:
——4-antenna port multi-user MIMO;
——Dual-antenna ports (antenna ports 7, 8) transmission.
The UE shall support the following uplink MIMO transmission technologies: single-antenna port transmission.
Support for the following uplink MIMO transmission technologies is optional:
——SRS transmit antenna selection diversity;
——PUSCH, PUCCH open-loop transmit antenna selection diversity;
——PUSCH, PUCCH closed-loop transmit antenna selection diversity;
——Uplink MU-MIMO.
7.2.4.2 MIMO transmission mode
The UE shall support the following MIMO transmission modes:
——Mode 1;
——Mode 2;
——Mode 3;
——Mode 4;
——Mode 6;
——Mode 7.
Optional support for Mode 5 and Mode 8.
The UE shall support adaptation between modes such as PDSCH transmission modes 2, 3, and 7.
The UE shall support adaptation between modes such as PDSCH transmission modes 2, 3, and 8, if the UE support mode 8.
7.2.5 Synchronization and cell search
The UE shall be able to complete the cell downlink synchronization through PSS and SSS signals and obtain the cell ID.
The UE shall be able to adjust the uplink transmission timing according to the TA command issued by the base station to complete the uplink synchronization.
7.2.6 Random access
The terminal shall be able to perform random access according to parameters such as PRACH time-frequency resources configured by the eNode B, PRACH configuration, random preamble format and the PRACH sequence group used by the cell.
The UE shall support the execution of contention and non-contention random access procedures in accordance with the configuration of network, and shall support the execution of contention and non-contention handover random access in accordance with network configuration.
The UE shall support preamble code formats: format 0, format 1, format 2, format 3 and format 4.
7.2.7 Modulation, coding and scrambling
The UE supports the following modulation modes:
——For downlink, it shall support BPSK, QPSK, 16QAM and 64QAM;
——For uplink, it shall support BPSK, QPSK, 16QAM, and support for 64QAM is optional.
The UE supports the following channel codes: Channel codes such as convolutional codes and Turbo shall be supported.
The UE shall be able to complete the modulation and demodulation, scrambling and descrambling operations of the adaptive modulation and coding according to the configuration of the network and the capabilities it supports.
7.2.8 Reference signal
7.2.8.1 Downlink reference signal
The UE shall support receiving the following downlink reference signals to complete the corresponding channel estimation and channel measurement:
——Cell common reference signal (antenna port 0);
——Cell common reference signal (antenna port 1);
——UE-specific reference signal (antenna port 5).
Support is optional for the following downlink reference signals:
——Cell common reference signal (antenna port 2);
——Cell common reference signal (antenna port 3);
——UE-specific reference signal (antenna port 7);
——UE-specific reference signal (antenna port 8).
7.2.8.2 Uplink reference signal
The UE shall support the following uplink reference signals:
——PUSCH demodulation reference signal (DRS);
——PUCCH demodulation reference signal;
——Uplink sounding reference signal (SRS).
The UE shall be able to complete the uplink reference signal transmission with the following different configurations according to the configuration of the eNode B:
——Cyclic shift of the uplink reference signal sequence;
——SRS resource mapping (including configuring SRS band width, SRS Comb, and SRS frequency hopping band width);
——Send the SRS in the normal uplink subframe (the SRS sending period, the sending subframe offset and the SRS sending duration can be configured);
——Send the SRS in UpPTS (2 symbols).
Support is optional for uplink reference signal transmission with the following configurations:
——Uplink reference signal sequence group jump;
——Uplink reference signal sequence jump;
——Send the SRS in UpPTS (1 symbol);
——Antenna selection sends SRS.
7.2.9 Resources allocation
7.2.9.1 Downlink resource allocation
The downlink of the UE shall support localized and distributed allocation modes of PDSCH, and support resource indication types of type 0, type 1 and type 2.
The UE shall support the adaptive allocation of the number of PDCCH symbols.
The UE shall support resource allocation of PBCH and SIB.
Foreword II
1 Scope
2 Normative References
3 Terms, Definitions and Abbreviations
3.1 Terms and Definitions
3.2 Abbreviations
4 Overview
5 UE Classification and Power Class
5.1 Classification of UE
5.2 Power Class of UE
5.3 UE Transmission Capability Level
6 Bearer Service
7 Functions of UE
7.1 Basic Functions of UE Human-Machine Interface
7.2 Functional Requirements on Physical Layer
7.3 Function of Layer
7.4 Functions of Layer 3 and NAS Layer
8 UE Performance
8.1 Channel Division
8.2 Transmitter Index
8.3 Receiver Index
8.4 Performance Requirements
8.5 Reporting of Channel State Information
8.6 Performance Requirements for Radio Resource Management
9 Power Consumption Requirements
10 Interface Requirements
10.1 Requirements for Uu Interface
10.2 Requirements for Cu (USIM-ME) Interface
11 Reliability Requirements
12 Electromagnetic Compatibility Requirements
13 Requirements for Specific Absorption Rate (SAR)
14 Requirements for Battery and Charger
14.1 Battery Performance
14.2 Requirements for Charger
15 Requirements for Appearance, Packaging and Assembly
