標準編號:	YD/T 839.3-2014
中文名稱:	通信電纜光纜用填充和涂覆復合物 第3部分：纜膏
英文名稱:	Filling compounds and flooding compounds for telecommunication cable and optical fibre cable Part 2:Filling compounds for cable
行業分類:	YD    通信行業標準
發布機構:	中華人民共和國工業和信息化部
發布日期:	2014-10-14
實施日期:	2014-10-14
標準狀態:	valid
替代舊標準:	YD/T 839.3-2000 通信電纜光纜用填充和涂覆復合物第3部分:冷應用型填充復合物 YD/T 839.2-2000 通信電纜光纜用填充和涂覆復合物第2部分:加熱應用型填充復合物
翻譯語言:	英文
文件格式:	PDF
中文字符數:	15000 字
翻譯價格(元):	1136.0
交付時間:	付款后 1 個工作日

1 Scope This part specifies the product classification, requirements, inspection rules and test methods, packaging, marking, transport and storage for filling compounds for telecommunication cable and optical fibre cable. This part is applicable to filling compounds for longitudinal water resistance used in telecommunication cable and optical fibre cable that are not in contact with optical fibers, optical fiber bundles, and optical fiber ribbons. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies. GB/T 325.2-2010 Packaging container - Steel drums - Part 2: Removable head (open head) drums with a minimum total capacity of 208 L, 210 L and 216.5 L GB/T 2828.1-2012 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (ISO 2859-1:1999, IDT) GB/T 2829-2002 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability) GB/T 6540-1986 Petroleum products - Determination of colour GB/T 13508-2011 Polyethylene blown containers YD/T 839.1-2014 Filling compounds and flooding compounds for telecommunication cable and optical fibre cable - Part 1: Test methods 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 filling compounds

Foreword i 1 Scope 2 Normative references 3 Terms and definitions 4 Product classification 4.1 General 4.2 Model and name 4.3 Specifications 4.4 Product labelling 5 Requirements 5.1 General requirements 5.2 Chemical components 5.3 Physical property 5.4 Environmental protection property 5.5 Material compatibility 6 Inspection rules and test methods 6.1 General 6.2 Term restrictions 6.3 End-of-manufacturing inspection 6.4 Type inspection 7 Packaging, marking, transport and storage 7.1 Packaging 7.2 Marking 7.3 Transport 7.4 Storage