1 Scope
This Standard specifies the terms and definitions, classification, materials, structure and performance requirements, test methods, inspection rules, marks, labels, instructions, packing, transport and storage for safety cabinets.
This Standard is applicable to biological safety cabinets (hereinafter referred to as the safety cabinets).
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
GB/T 191-2000 Packaging-Pictorial Marking for Handling of Goods
GB 4793.1-1995 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use-Part 1: General Requirements
3 Terms and Definitions
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification
4.1 General
4.2 Class I Safety Cabinet
4.3 Class II Safety Cabinet
4.4 Class III Safety Cabinet
5 Requirements
5.1 Appearance
5.2 Materials
5.3 Construction
5.4 Performance
6 Test Method
6.1 Appearance and Materials
6.2 Structure
6.3 Performance
7 Inspection Rules
7.1 Inspection Type
7.2 Ex-factory Inspection
7.3 Type Inspection
7.4 Installation Inspection
7.5 Maintenance and Inspection
8 Label and Mark
8.1 Product Labeling (Nameplate)
8.2 Package Marks
9 Package, Transport and Storage
9.1 Package
9.2 Transport
9.3 Storage
Appendix A (Informative) Installation Recommendation of Class II Safety Cabinet
Appendix B (Informative) Recommended Microbiological Decontamination Procedure
Appendix C (Normative) Preparation of Bacillus Subtilis Spore Suspension
Appendix D (Normative) Nebulizer Selection and Calibration
Appendix E (Normative) Potassium iodide (KI) Method
Appendix F (Normative) Measurement of Air Volume in Round and Rectangular Ducts
Bibliography
